저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
M.2 2280 SSD with black finned heatsink covering the board

AGI

AGI AI828 1TB internal SSD PCIe 4.0 x4 heatsink

SKU CH-82XX-W1GHB

A 1TB M.2 2280 drive with a heatsink, PCIe 4.0 x4 interface and sequential speeds up to 7400 MB/s read and 6700 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCI-Express 4.0 x4

Options AI828-1TB

  • Up to 7400 MB/s sequential read for ultra-fast load times
  • Up to 6700 MB/s sequential write for rapid file transfers
  • Integrated heatsink maintains performance during heavy workloads
  • 3000 TBW endurance rating for long-term reliability
  • 2,000,000 hours MTBF for sustained operation

AGI AI828 1TB PCIe 4.0 x4 SSD

The AGI AI828 is a 1TB internal solid-state drive built for consumer desktops and notebooks. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface. Sequential reads reach up to 7400 MBps while writes reach up to 6700 MBps, making it suitable for gaming, content creation and data-intensive workloads.

Integrated heatsink and NANDXtend ECC

A high-conductivity heatsink ships attached to the drive, helping to dissipate heat during sustained transfers. The controller employs NANDXtend ECC technology alongside 3D NAND to protect data integrity at high speeds. SMART and TRIM commands are supported for ongoing maintenance and consistent operation.

Check M.2 slot keying and heatsink clearance

Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4 operation. Confirm the physical space around the slot can accommodate the fitted heatsink without interfering with other components or case panels. Ensure the system BIOS is current to enable full performance.

주요 특징

  • Up to 7400 MB/s sequential read for ultra-fast load times
  • Up to 6700 MB/s sequential write for rapid file transfers
  • Integrated heatsink maintains performance during heavy workloads
  • 3000 TBW endurance rating for long-term reliability
  • 2,000,000 hours MTBF for sustained operation

사양

BrandAGI
SeriesAI828
ModelAGI1T0G44AI828
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 6700 MBps
Terabytes Written (TBW)3000TB(4TB)
MTBF2,000,000 hours
HeatSinkwith HeatSink
Features? High quality heatsink
? Speed up to 7400MB/s
? 4TB ultra-large capacity
? Support NVMe1.4
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Operating Humidity5% to~98%RH (Non-condensing)
Max Shock Resistance1500G
Max Vibration Resistance15G
Height5.30mm
Width22.00mm
Depth80.00mm
Weight7.5g

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 3000 TBW endurance rating require me to replace the drive soon?

The 3000 TBW rating combined with a 2,000,000 hour MTBF indicates a long service life before any replacement is needed.

Does the 7400 MB/s read speed drop when the drive gets hot during long sessions?

The included high-conductivity heatsink manages heat to maintain performance within the 0°C to 70°C operating range.

How much power does the PCIe 4.0 x4 interface draw when the SSD runs all day?

The drive operates on standard M.2 slot power with NVMe 1.4 efficiency features like SMART and TRIM for steady operation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.