SanDisk SD8SN8U-256G-1122 X400 256GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Enterprise
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
SanDisk
512 GB M.2 2280 SATA SSD with 540 MB/s reads, 520 MB/s writes and 1.75 million-hour MTTF for enterprise workloads
The SanDisk X400 SD8SN8U-512G-1122 is a 512GB internal solid state drive built for enterprise workloads. It uses a M.2 2280 form factor with a SATA III interface and sixth-generation TLC flash memory. Sequential reads reach up to 540 MBps and writes up to 520 MBps. The drive measures 1.5mm in height for slim system compatibility.
This drive suits users running heavy workloads such as photo and video editing, multitasking or office productivity in ultrathin designs. It offers endurance up to 320 TBW with nCache 2.0, DataGuard client and LDPC error correction for data integrity. Buyers needing a 2.5 inch 7mm drive should select that form factor instead.
The single specification that decides fit is the SATA III interface, which limits throughput to the SATA bus rather than PCIe lanes. Verify the host system provides a SATA-wired M.2 slot before purchase. Operating temperature ranges from 0°C to 70°C with shock resistance rated at 1500G.
| Brand | SanDisk |
|---|---|
| Series | X400 |
| Model | SD8SN8U-512G-1122 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 93,500 IOPS |
| 4KB Random Write | Up to 75,000 IOPS |
| MTTF | Up to 1.75M hours |
| Features | Up to 1TB in A Single-sided M.2 2280 and 2.5" 7mm Form Factors Ncache 2.0 Maximizes Read/write Operations and Improves Responsiveness Greater Reliability With Dataguard Client and The New Ldpc Error Correction Mechanism Available In 128GB, 256GB, 512GB, and 1TB Capacities in Both 2.5" 7mm and M.2 2280 Form Factor Better Slumber Mode For Greater Low Power Efficiency TCG Opal 2.0 Support |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -55°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | Operating: 5.0 gRMS, 10 - 2000 Hz Non-operating: 4.9 gRMS, 7 - 800 Hz |
| Height | 1.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| น้ำหนักในการจัดส่ง | 0.03 kg |
| ขนาดบรรจุภัณฑ์ | 109 × 64 × 8 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes, the drive uses the standard M.2 2280 form factor with a 1.5mm single-sided profile, so it fits any M.2 2280 slot that accepts SATA signalling.
Insert the drive at an angle, press it flat, and fasten the single retention screw; the step often missed is fully tightening that screw so the drive stays seated under vibration.
The drive is rated for up to 320 TBW, which represents the total host writes the TLC memory is warranted to sustain.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม