SanDisk SD8SN8U-256G-1122 X400 256GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Enterprise
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
SanDisk
512 GB M.2 2280 SATA SSD with 540 MB/s reads, 520 MB/s writes and 1.75 million-hour MTTF for enterprise workloads
The SanDisk X400 SD8SN8U-512G-1122 is a 512GB internal solid state drive built for enterprise workloads. It uses a M.2 2280 form factor with a SATA III interface and sixth-generation TLC flash memory. Sequential reads reach up to 540 MBps and writes up to 520 MBps. The drive measures 1.5mm in height for slim system compatibility.
This drive suits users running heavy workloads such as photo and video editing, multitasking or office productivity in ultrathin designs. It offers endurance up to 320 TBW with nCache 2.0, DataGuard client and LDPC error correction for data integrity. Buyers needing a 2.5 inch 7mm drive should select that form factor instead.
The single specification that decides fit is the SATA III interface, which limits throughput to the SATA bus rather than PCIe lanes. Verify the host system provides a SATA-wired M.2 slot before purchase. Operating temperature ranges from 0°C to 70°C with shock resistance rated at 1500G.
| Brand | SanDisk |
|---|---|
| Series | X400 |
| Model | SD8SN8U-512G-1122 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 93,500 IOPS |
| 4KB Random Write | Up to 75,000 IOPS |
| MTTF | Up to 1.75M hours |
| Features | Up to 1TB in A Single-sided M.2 2280 and 2.5" 7mm Form Factors Ncache 2.0 Maximizes Read/write Operations and Improves Responsiveness Greater Reliability With Dataguard Client and The New Ldpc Error Correction Mechanism Available In 128GB, 256GB, 512GB, and 1TB Capacities in Both 2.5" 7mm and M.2 2280 Form Factor Better Slumber Mode For Greater Low Power Efficiency TCG Opal 2.0 Support |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -55°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | Operating: 5.0 gRMS, 10 - 2000 Hz Non-operating: 4.9 gRMS, 7 - 800 Hz |
| Height | 1.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| وزن الشحنة | 0.03 kg |
| أبعاد الطرد | 109 × 64 × 8 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the drive uses the standard M.2 2280 form factor with a 1.5mm single-sided profile, so it fits any M.2 2280 slot that accepts SATA signalling.
Insert the drive at an angle, press it flat, and fasten the single retention screw; the step often missed is fully tightening that screw so the drive stays seated under vibration.
The drive is rated for up to 320 TBW, which represents the total host writes the TLC memory is warranted to sustain.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟