SanDisk SD8SN8U-256G-1122 X400 256GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Enterprise
SanDisk
512 GB M.2 2280 SATA SSD with 540 MB/s reads, 520 MB/s writes and 1.75 million-hour MTTF for enterprise workloads
The SanDisk X400 SD8SN8U-512G-1122 is a 512GB internal solid state drive built for enterprise workloads. It uses a M.2 2280 form factor with a SATA III interface and sixth-generation TLC flash memory. Sequential reads reach up to 540 MBps and writes up to 520 MBps. The drive measures 1.5mm in height for slim system compatibility.
This drive suits users running heavy workloads such as photo and video editing, multitasking or office productivity in ultrathin designs. It offers endurance up to 320 TBW with nCache 2.0, DataGuard client and LDPC error correction for data integrity. Buyers needing a 2.5 inch 7mm drive should select that form factor instead.
The single specification that decides fit is the SATA III interface, which limits throughput to the SATA bus rather than PCIe lanes. Verify the host system provides a SATA-wired M.2 slot before purchase. Operating temperature ranges from 0°C to 70°C with shock resistance rated at 1500G.
| Brand | SanDisk |
|---|---|
| Series | X400 |
| Model | SD8SN8U-512G-1122 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 93,500 IOPS |
| 4KB Random Write | Up to 75,000 IOPS |
| MTTF | Up to 1.75M hours |
| Features | Up to 1TB in A Single-sided M.2 2280 and 2.5" 7mm Form Factors Ncache 2.0 Maximizes Read/write Operations and Improves Responsiveness Greater Reliability With Dataguard Client and The New Ldpc Error Correction Mechanism Available In 128GB, 256GB, 512GB, and 1TB Capacities in Both 2.5" 7mm and M.2 2280 Form Factor Better Slumber Mode For Greater Low Power Efficiency TCG Opal 2.0 Support |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -55°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | Operating: 5.0 gRMS, 10 - 2000 Hz Non-operating: 4.9 gRMS, 7 - 800 Hz |
| Height | 1.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| 배송 무게 | 0.03 kg |
| 포장 크기 | 109 × 64 × 8 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, the drive uses the standard M.2 2280 form factor with a 1.5mm single-sided profile, so it fits any M.2 2280 slot that accepts SATA signalling.
Insert the drive at an angle, press it flat, and fasten the single retention screw; the step often missed is fully tightening that screw so the drive stays seated under vibration.
The drive is rated for up to 320 TBW, which represents the total host writes the TLC memory is warranted to sustain.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?