我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with black chips and gold edge connectors

A-Tech

A-Tech 16GB DDR5 4800 CL40 1.1V desktop RAM

SKU CH-X28A-R91MB

A 16 GB DDR5 desktop module running at 4800 MHz with CL40 latency and standard 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 4800 MHz speed delivers high bandwidth for responsive performance
  • CL40 latency at 1.1 V balances timing with standard DDR5 efficiency
  • 288-pin UDIMM form factor fits mainstream desktop memory slots
  • Major-brand chipset ensures tested reliability across compatible AMD and Intel platforms

A-Tech 16GB DDR5 4800 Desktop Memory

This 16GB DDR5 module runs at 4800MHz with a CL40 latency and standard 1.10V operation. It uses unbuffered, non-ECC chips from major brands and fits any desktop motherboard with a 288-pin DDR5 slot. The single stick adds capacity for everyday workloads and multitasking.

Build fit: 288-pin DDR5 DIMM, 1.10V standard voltage

Installation requires a motherboard with DDR5 slots; the module draws power at the standard 1.10V so no manual voltage adjustment is needed. As an unbuffered DIMM it works directly with the memory controller, leaving all remaining slots free for future expansion up to your board's limit.

Suits mainstream AMD and Intel desktop upgrades

Ideal for users replacing a failed stick or adding 16GB to a compatible DDR5 system who want tested major-brand chips and a direct Kingston KVR48U40BS8-16 equivalent. Builders needing ECC, registered modules, higher frequencies or lower latencies should consider other kits.

商品特色

  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 4800 MHz speed delivers high bandwidth for responsive performance
  • CL40 latency at 1.1 V balances timing with standard DDR5 efficiency
  • 288-pin UDIMM form factor fits mainstream desktop memory slots
  • Major-brand chipset ensures tested reliability across compatible AMD and Intel platforms

商品規格

BrandA-Tech
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

商品問答

Will the CL40 latency hold back performance during long rendering jobs?

CL40 is the rated CAS latency at 4800 MT/s; the module runs at 1.1 V with standard JEDEC timings, so latency stays consistent under sustained load.

Does the stick run hot or noisy when the system is on all day?

The DIMM operates at the DDR5 standard 1.1 V with no onboard fan, so it adds minimal heat and makes no noise of its own.

What motherboard slot is required for this 288-pin DDR5 module?

A desktop DDR5 DIMM slot (288-pin) is needed; the board must support DDR5 4800 unbuffered non-ECC memory.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。