EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
4GB DDR3 1866 ECC UDIMM module with CL13 latency and 1.50V operation for server memory upgrades
This 4GB DDR3 1866MHz ECC unbuffered DIMM uses a 1Rx8 layout with CL13 latency at 1.5V. It targets administrators maintaining or expanding older server and workstation platforms that require DDR3 ECC memory in a 240-pin form factor.
The module is specified as a compatible equivalent for Hynix part numbers HMT451U7AFR8C-RD, HMT451U7BFR8C-RD and HMT451U7DFR8C-RD. Using major-brand chips, it allows a like-for-like swap without firmware changes, restoring original capacity and error-correction behaviour in qualified systems.
The DDR3 1866 PC3-14900 standard caps per-module bandwidth and density at this speed grade. Systems needing higher throughput, larger individual modules, or registered DIMM buffering cannot be satisfied by this unbuffered DDR3 specification.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The Major Brand Chipset and 1Rx8 layout are built for continuous server workloads; ECC corrects single-bit errors on the fly so the module itself does not require scheduled replacement.
The 1.50 V standard voltage and CL13 latency set the thermal ceiling; sustained full-speed operation will hit the DDR3 JEDEC thermal limit before any timing or voltage headroom is exhausted.
At 1.50 V the module draws only standard DDR3 power, adding minimal heat that existing server airflow handles without extra fan speed or audible noise increase.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?