BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
A 4 GB DDR3L desktop DIMM running at 1600 MHz with CL11 latency and 1.35 V operation
This single 4GB module uses DDR3L technology at 1600MHz with a CAS latency of 11. It is designed as a compatible replacement for the Kingston ACR16D3LU1NGG/4G part number in desktop systems.
The module follows the standard 240-pin DIMM form factor and operates at a low 1.35V voltage. Unbuffered design means it installs directly into consumer desktop motherboard slots without requiring registered memory support.
DDR3L specification allows operation at 1.35V, reducing power draw compared to standard DDR3 while maintaining the 1600MHz data rate. Systems must support the DDR3L standard to recognise the lower voltage; older DDR3-only platforms may not boot correctly with this module.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, the PC3L-12800 rating caps the maximum theoretical bandwidth at 12 800 MB/s; actual throughput will be lower due to overhead and system configuration.
The module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop motherboard with a DDR3 DIMM slot.
Power off the PC, open the case, align the notch on the module with the slot key, press down firmly until both side clips click, then verify the new capacity in BIOS.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?