A-Tech 4GB DDR4 2400MHz CL17 1.2V 260-Pin SO-DIMM laptop RAM
- 4GB
- 260-Pin DDR4 SO-DIMM
A-Tech
4GB DDR4 desktop module running at 2666MHz with CL19 latency and 1.2V operation
Speed DDR4 2666 (PC4 21300)
This 4GB DDR4 module runs at 2666MHz with a CL19 latency and standard 1.2V operation. It is an unbuffered non-ECC UDIMM built for desktop systems that accept 288-pin DDR4 memory. The single stick adds capacity for everyday computing and multitasking.
At the rated 2666MHz frequency the module maintains stable throughput during extended workloads thanks to JEDEC-standard 1.20V voltage. Unbuffered architecture keeps latency predictable at CL19 while the 288-pin DDR4 interface delivers consistent bandwidth without throttling under continuous use.
Align the notch on the 288-pin DIMM with the motherboard slot key and press firmly until the retention clips click into place. The 1.2V DDR4 standard avoids legacy voltage conflicts, but systems limited to lower speeds will downclock the module automatically. Verify the board supports DDR4 2666 before fitting.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Desktop Memory RAM |
| Capacity | 4GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The module runs at the standard DDR4 voltage of 1.2 V, so power draw and heat output stay low even under continuous load.
You need a desktop motherboard with a DDR4 DIMM slot and a memory controller that supports 2666 MHz operation.
Yes, the system will clock all modules to the lowest common speed and latency, so the 2666 MHz stick will simply run slower to match.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?