我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular DDR5 RDIMM circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 64GB DDR5 6400 ECC RDIMM 2Rx4 Hynix HMCG94AHBRA 480N 481N 487N Server RAM

SKU CH-VWJ3-F05RV

64GB DDR5 6400 ECC registered server DIMM with 2Rx4 layout and 1.1V operation

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS Latency32
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity enables large-scale virtualization and data workloads
  • DDR5 6400 speed delivers high bandwidth for compute-intensive tasks
  • ECC RDIMM design detects and corrects memory errors automatically
  • 2Rx4 dual-rank architecture increases memory density per channel
  • 10 V operation reduces power draw in dense server deployments

64GB DDR5 6400 ECC RDIMM Server Module

This 64GB DDR5 6400 ECC registered DIMM is built for servers and workstations that require error-correcting memory at standard voltage. It uses a 288-pin form factor with a 2Rx4 rank configuration and CAS latency of 32. The module operates at 1.10V and is validated as a direct replacement for specific Hynix part numbers.

Replaces Hynix HMCG94AHBRA series modules

It replaces the Hynix HMCG94AHBRA, 480N, 481N and 487N modules when a system calls for that exact DDR5 6400 registered ECC specification. The upgrade is worth it when the platform supports DDR5 6400 RDIMM population rules and the workload needs the higher bandwidth of PC5-51200. Systems limited to lower DDR5 speeds or unbuffered DIMMs will not accept this module.

DDR5 6400 registered ECC platform constraints

The DDR5 6400 RDIMM standard requires a memory controller and BIOS that support 6400 MT/s registered ECC operation at 1.10V. Population limits depend on the specific CPU and motherboard qualification list; exceeding the supported ranks per channel will prevent boot. Mixing with different speeds, ranks or unbuffered DIMMs is not supported by the DDR5 RDIMM specification.

商品特色

  • 64 GB capacity enables large-scale virtualization and data workloads
  • DDR5 6400 speed delivers high bandwidth for compute-intensive tasks
  • ECC RDIMM design detects and corrects memory errors automatically
  • 2Rx4 dual-rank architecture increases memory density per channel
  • 10 V operation reduces power draw in dense server deployments

商品規格

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCG94AHBRA HMCG94AHBRA480N HMCG94AHBRA481N HMCG94AHBRA487N
ModelA-Tech 64GB DDR5-6400 ECC RDIMM Server RAM Module
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS Latency32
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

商品問答

Will the 288-pin DDR5 RDIMM fit my server's memory slots?

This module uses the standard 288-pin DDR5 RDIMM form factor, so it fits any server or workstation slot designed for DDR5 registered DIMMs.

What is the correct way to seat this 2Rx4 registered module, and what step do installers often miss?

Align the notch with the slot key, press firmly until both retention clips click, and verify the motherboard detects the full 64 GB capacity at 6400 MT/s in the BIOS.

Does the 1.10 V DDR5 module need any periodic maintenance or component replacement?

No scheduled maintenance is required; the module has no heat spreader or moving parts, so it runs for the system's lifetime unless a hardware fault occurs.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。