EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
An 8 GB DDR5 desktop module running at 4800 MHz with CL40 latency and 1.1 V operation
This 8GB DDR5 4800 module is built as a direct replacement for the Samsung M323R1GB4BB0-CQK part. It fits standard 288-pin DIMM slots and runs at the JEDEC standard 1.10V. The single-rank 1Rx16 organisation keeps the design simple for desktop boards that accept unbuffered non-ECC memory. Users who need a straightforward capacity increase without overclocking will find it matches the original specification.
Operating at the standard 1.10V DDR5 voltage, the module draws only the power required for its 4800 MT/s data rate. With no heat spreader attached, the bare PCB relies on normal case airflow to stay within thermal limits. The low voltage and lack of active cooling mean acoustic contribution is effectively zero in a typical chassis. Power consumption scales with workload but remains consistent with the DDR5 baseline for this density.
The Samsung chipset on the PCB is the same component used in the original M323R1GB4BB0-CQK, so electrical behaviour matches the OEM part. A-Tech tests every module at 4800 MT/s with CL40 latency before shipping, confirming signal integrity at the rated speed. The validation process replaces the need for separate driver or firmware packages; the board simply recognises the SPD data and configures itself. No extra software or accessories are bundled because the memory is a self-contained hardware upgrade.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M323R1GB4BB0-CQK |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Samsung Chipset |
| Heat Spreader | No |
| Features | M323R1GB4BB0-CQK |
| Recommend Use | Compatible Replacement for Samsung M323R1GB4BB0-CQK |
Align the notch on the module with the key in the slot, press down firmly until both side clips snap shut, then verify in BIOS that the 4800 MT/s speed is active — many builders forget to enable the XMP or EXPO profile.
No scheduled maintenance is required; keep the contacts clean and ensure case airflow stays adequate, and replace the module only if memory diagnostics report errors or capacity becomes insufficient.
The CAS latency of 40 cycles at 4800 MT/s sets the baseline response time, so latency-sensitive workloads hit that timing ceiling before bandwidth or thermal limits become a factor.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?