我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black NBR70 O-ring 34.5 x 2 mm for Alphacool GPX GPU block

Alphacool

Alphacool Replacement O-Ring 34.5 x 2mm NBR70 GPX 95085

SKU CH-TP5T-X0YYC

Replacement O-ring 34.5 x 2 mm NBR70 seals Alphacool GPX GPU water blocks

  • ColorBlack
  • FeaturesReplacement O-Ring for Alphacool GPX GPU Block
  • Fits Alphacool GPX GPU blocks precisely
  • 5 x 2 mm size matches original spec
  • NBR70 compound resists coolant degradation
  • Black silicone seals without staining tubing
  • Single replacement ring restores leak-free operation

Alphacool GPX GPU Block O-Ring

This black silicone O-ring is a direct replacement seal for Alphacool GPX series GPU water blocks. It restores the original sealing surface when the factory ring has aged or been damaged during maintenance. The part is sold new and individually packaged.

Simple press-fit installation

The ring seats in the existing groove on the GPX block without tools. Take care to clean the channel thoroughly before fitting; residual coolant or debris is the most common cause of leaks after reassembly. Stretching the ring excessively while positioning it can create a permanent deformation that compromises the seal.

Sized for GPX groove only

The 34.5 mm by 2 mm cross-section matches the specific gland dimensions of the Alphacool GPX GPU block. It will not seal correctly in fittings, reservoirs or blocks from other series that use different groove widths or diameters. The NBR70 material is rated for typical liquid-cooling temperatures and coolant chemistries.

商品特色

  • Fits Alphacool GPX GPU blocks precisely
  • 5 x 2 mm size matches original spec
  • NBR70 compound resists coolant degradation
  • Black silicone seals without staining tubing
  • Single replacement ring restores leak-free operation

商品規格

BrandAlphacool
Model95085
ColorBlack
FeaturesReplacement O-Ring for Alphacool GPX GPU Block

商品問答

How can I confirm the 34.5 x 2mm O-ring is sealing my Alphacool GPX GPU block correctly after installation?

Fill the loop and run the pump at low speed while watching the block's acrylic top and fitting edges; no droplets or pressure drop means the NBR70 ring is seated properly.

What comes in the package and is any extra hardware needed for the replacement?

The box contains one black 34.5 x 2mm NBR70 O-ring (part 95085); no tools or additional seals are included, so reuse the existing compression fittings and screws.

Which O-ring size matches my Alphacool GPX block — 34.5 x 2mm or another dimension?

Choose the 34.5 x 2mm NBR70 ring (part 95085); it is the direct replacement specified for the GPX GPU block channel groove.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。