Antec
Antec P7 S Mid-Tower ATX PC Case
Mid-tower ATX case with four pre-installed PWM fans, dual side mesh intake, 360 mm top radiator support, sound-dampening side panels and 405 mm GPU clearance
- TypeATX Mid Tower
- ColorBlack
- Case MaterialSteel / Plastic
- Motherboard CompatibilityATX / ITX / Micro ATX
- Side PanelSteel Side Panel + Sound Dampening Foam
- Dust FiltersBottom / Top
Options P7 S
- Dual side mesh panels boost intake airflow for cooler components
- Four pre-installed 120 mm PWM fans with daisy-chain control ready to use
- Top mount supports 360 mm radiator for high-performance liquid cooling
- Sound-dampening foam on both side panels cuts system noise
- GPU clearance of 405 mm fits long graphics cards including RTX 50 Series
Build-Ready Mid-Tower
The Antec P7 S is a black ATX mid-tower built from steel and plastic. It accepts ATX, Micro-ATX and ITX motherboards and includes four 120 mm PWM fans pre-wired in a daisy-chain for simple speed control. Two 3.5-inch and one 2.5-inch internal drive bays provide storage flexibility for mainstream builders.
Straightforward Assembly
Seven expansion slots and a 405 mm maximum graphics-card length leave ample room for large GPUs. A 175 mm CPU-cooler height limit and 270 mm power-supply depth allowance cover most air coolers and standard ATX units. Four rubber cable grommets and three Velcro straps keep wiring tidy, while removable top and bottom dust filters simplify cleaning.
Cooling & I/O Limits
The top panel supports radiators up to 360 mm and fans up to 240 mm, while the front takes up to 240 mm and the rear a single 120 mm unit. A bottom intake with roughly 30 mm clearance enables reverse-mounted fans to blow directly on the graphics card. The front I/O includes a USB 3.2 Gen 2 Type-C port for fast external storage.
商品特色
- Dual side mesh panels boost intake airflow for cooler components
- Four pre-installed 120 mm PWM fans with daisy-chain control ready to use
- Top mount supports 360 mm radiator for high-performance liquid cooling
- Sound-dampening foam on both side panels cuts system noise
- GPU clearance of 405 mm fits long graphics cards including RTX 50 Series
商品規格
| Brand | Antec |
|---|---|
| Model | P7 S |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel / Plastic |
| Motherboard Compatibility | ATX / ITX / Micro ATX |
| Side Panel | Steel Side Panel + Sound Dampening Foam |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 7 |
| Fan Options | Included Fan(s): 3 x 120mm PWM fans at the front + 1 x 120mm PWM fan at the rear |
| Radiator Options | Front - Up to 120mm / Front - Up to 140mm / Front - Up to 240mm / Rear - Up to 120mm / Top - Up to 120mm / Top - Up to 240mm / Top - Up to 360mm |
| Max GPU Length | 405 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 270 mm |
| Dimensions | 18.82 x 8.74 x 18.31inch |
| Weight | 5.75kg |
| 出貨重量 | 7.17 kg |
| 包裝尺寸 | 552 × 552 × 292 mm |
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
商品問答
How do I confirm the 4 pre-installed 120mm PWM fans are running after I build in the P7 S?
Connect the daisy-chain cable to a motherboard PWM header, then check fan speeds in BIOS or monitoring software; all four fans should report RPM under load.
What comes in the box and what must I buy separately for the Antec P7 S?
The case includes 4 PWM fans, 4 rubber grommets, 3 Velcro straps, removable top filters and dust filters for bottom and top; you must purchase motherboard, PSU, CPU cooler, GPU, drives and any extra fans or radiators separately.
Which top radiator size should I choose for the P7 S — 120mm, 240mm or 360mm?
The top supports up to 360mm; pick 360mm for maximum liquid-cooling capacity, 240mm for a balance of performance and clearance, or 120mm if space above the motherboard is limited.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。








