BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
BFKK
A 4U rackmount server chassis with eight hot-swap 3.5-inch SATA/SAS drive bays and a 12Gbps SFF-8643 backplane
The 4U rackmount enclosure accepts EATX, ATX, Micro-ATX and Mini-ITX motherboards, giving builders a wide choice of server or workstation platforms. Eight full-height expansion slots provide room for multiple add-in cards such as RAID controllers, network adapters or GPU accelerators. A standard ATX supply or a redundant CRPS unit can be fitted, so power architecture matches the deployment.
The SFF-8643 MiniSAS backplane delivers 12 Gbps bandwidth per lane to each hot-swap bay. That ceiling is set by the SAS-3 electrical specification, so drives faster than 12 Gbps will negotiate down to this speed. Cable routing uses the two included reversed SFF-8643 to 4×SATA cables, which carry the same 12 Gbps limit to SATA targets.
Eight front-accessible 3.5-inch bays accept both 3.5 and 2.5-inch SATA or SAS drives, plus one fixed internal 3.5-inch position for a boot or parity device. The hot-swap design allows drive replacement without powering down, while three 12038 PWM fans and two optional 8 cm rear fans move air across dense drive stacks. Storage grows until the eight-bay backplane is full.
| Chassis Type | Rackmount |
|---|
The chassis includes eight hot-swap bays that accept 3.5-inch SATA or SAS drives, and 2.5-inch drives are also compatible in the same bays.
The 12Gbps MiniSAS backplane can deliver up to 12Gbps per lane to each connected SATA or SAS drive, so drive speed is limited by the drive itself rather than the backplane.
The SFF-8643 MiniSAS HD backplane carries four lanes of 12Gbps SAS or SATA signalling, capping each drive at the protocol's 12Gbps maximum.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?