我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular silver mining server with four front fans and ventilation grilles

bitmain

Bitmain Antminer S19 XP 141TH/s 3010W Rack Server

SKU CH-YRR1-PDJT4

A Bitcoin miner delivering 141 TH/s at 3010 W with 21.5 J/TH efficiency

  • TypeMiner
  • 5 nm chip design delivers 141 TH/s hashrate
  • 5 J/TH efficiency reduces electricity cost per terahash
  • 3010 W power draw fits standard 3-phase PDU strips
  • 75 dB noise level suits dedicated rack rooms
  • 195 x 290 x 400 mm form factor slides into 19-inch cabinets

Bitmain Antminer S19 XP 141TH/s Miner

The Bitmain Antminer S19 XP is a new server system designed for cryptocurrency mining. It delivers a hash rate of 141TH/s with a power draw of 3010W. The unit measures 195 x 290 x 400mm and weighs 14500g. Four fans produce a noise level of 75db during operation.

Suited for dedicated mining operations

This hardware suits operators who need high hash-rate density and 21.5 J/TH efficiency in a rack-mount form factor. It is not for buyers who require a general-purpose server, quiet office equipment, or a device with standard return policies. The 3010W power demand also rules out sites without adequate electrical infrastructure.

141TH/s hash rate at 21.5 J/TH efficiency

The decisive specification is the 141TH/s hash rate achieved at 21.5 J/TH. This ratio determines whether the miner meets your profitability threshold at current electricity costs. No other figure in the data sheet overrides this efficiency metric for purchase decisions.

商品特色

  • 5 nm chip design delivers 141 TH/s hashrate
  • 5 J/TH efficiency reduces electricity cost per terahash
  • 3010 W power draw fits standard 3-phase PDU strips
  • 75 dB noise level suits dedicated rack rooms
  • 195 x 290 x 400 mm form factor slides into 19-inch cabinets

商品規格

TypeMiner

商品問答

What power supply capacity is needed to run the 3010W Antminer S19 XP?

You need a power source that can deliver at least 3010 W continuously, with the correct high-current connectors for the miner's input terminals.

Will the 75 dB noise level of this S19 XP be noticeably louder than older S19 units I already run?

At 75 dB the S19 XP sits in the same loud-industrial range as earlier S19 models, so expect a similar acoustic footprint in your rack.

How can I confirm the miner is achieving its rated 141 TH/s after installation?

Check the dashboard on the controller board or your mining-pool worker page; a stable reading near 141 TH/s with 21.5 J/TH efficiency shows it is operating as specified.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。