我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Bitspower G1/4 male-to-female 90-degree rotary extender in true brass finish

Bitspower

Bitspower BP-TB90R 90° rotary extender fitting

SKU CH-47AF-B8TAD MPN BP-TB90R

G1/4" male-to-female rotary extender provides a 90-degree turn for custom liquid-cooling loops

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • 90° rotary joint enables flexible tube routing
  • G1/4" male-to-female thread fits standard loops
  • Hidden O-ring design prevents leaks cleanly
  • True Brass construction resists corrosion reliably

90° Rotary G1/4 Extender Fitting

The Bitspower BP-TB90R is a true brass G1/4 male-to-female extender with a 90-degree rotary angle. It connects rigid or flexible tubing runs in custom liquid-cooling loops while allowing the joint to swivel for alignment. The hidden O-ring design seals the thread without exposed rubber. This fitting suits builders who need a compact right-angle connection with full rotation.

Installing the Rotary Fitting

Screw the male G1/4 thread into the component port by hand, then tighten lightly with a wrench on the brass flats. The female end accepts any standard G1/4 barb, compression fitting or plug. The rotary joint spins freely after installation so you can orient the connected run without stressing the port. Over-tightening can damage the hidden O-ring and cause a slow leak.

Compatibility Checks Before Buying

Verify that every component you plan to connect uses a G1/4 BSPP thread; tapered pipe threads will not seal correctly. Confirm there is enough clearance around the port for the 90-degree body and the rotary mechanism to turn without hitting neighbouring fittings or the case wall. Builders using non-standard thread sizes or needing a straight pass-through should choose a different fitting type.

商品特色

  • True Hi-Flow design maximises coolant throughput
  • 90° rotary joint enables flexible tube routing
  • G1/4" male-to-female thread fits standard loops
  • Hidden O-ring design prevents leaks cleanly
  • True Brass construction resists corrosion reliably

商品規格

TypeFittings

商品問答

How do I confirm the Bitspower BP-TB90R is working correctly after installation?

Tighten the G1/4" male thread until the hidden O-ring compresses, then rotate the female end — it should turn smoothly through the full 90° angle without binding or leaking.

What comes in the box with the Bitspower BP-TB90R, and what must I purchase separately?

The box contains the single G1/4" male-to-female 90° rotary extender fitting; you must buy tubing, G1/4" compatible water blocks or radiators, and coolant separately.

Which version of the Bitspower BP-TB90R should I choose for my loop?

Only the True Brass finish is offered for this G1/4" Hi-Flow rotary extender, so select it when you need a 90° swivel connection in a brass-themed build.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。