我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR4 DIMM sticks without heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM1024722400ECCNR 16GB (2x8GB) DDR4 2400 ECC DIMM

SKU CH-0MFX-DV1J7

ECC unregistered DDR4 kit with two 8 GB modules at 2400 MHz CL17 for Dell PowerEdge T30, T330 and Storage NX430 servers

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • ECC protection prevents data errors in Dell PowerEdge servers
  • 16 GB dual-channel kit matches 4-slot motherboard layout
  • DDR4 2400 MHz speed rated for 19200 MB/s bandwidth
  • Unregistered DIMM installs directly in T30, T330, NX430 systems
  • Low 1.2 V operation reduces power draw and heat

16 GB ECC kit for Dell PowerEdge servers

This 16 GB kit provides two 8 GB DDR4 2400 modules with ECC error correction and unregistered operation. It is built for the Dell PowerEdge T30, T330 and Storage NX430 platforms that require 288-pin DIMMs. The matched pair installs directly into the four available slots on those systems.

Thermals noise and power draw

Each module runs at 1.2 V without a heat spreader, keeping power consumption low in normal server workloads. Standard DDR4 signalling at CL17 17-17-17 timing produces minimal heat, so existing chassis airflow handles cooling silently. No additional fan speed or voltage adjustments are needed for typical use.

Upgrade path and when it matters

The kit expands a single-module configuration to dual-channel bandwidth and raises total capacity toward the 64 GB platform maximum. It is not for systems that require registered or load-reduced DIMMs, nor for boards limited to non-ECC memory. Buyers needing more than 16 GB per module or speeds above 2400 MT/s should look elsewhere.

商品特色

  • ECC protection prevents data errors in Dell PowerEdge servers
  • 16 GB dual-channel kit matches 4-slot motherboard layout
  • DDR4 2400 MHz speed rated for 19200 MB/s bandwidth
  • Unregistered DIMM installs directly in T30, T330, NX430 systems
  • Low 1.2 V operation reduces power draw and heat

商品規格

BrandComputer Memory Solutions
ModelCM1024722400ECCNR
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge T30, Poweredge T330, Storage NX430
Package Content2 Memory RAM Sticks

商品問答

How do I install the 288-pin DDR4 DIMMs in the four slots of a PowerEdge T30, and what step is often missed?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 16 GB are recognised at 2400 MHz.

What maintenance or replacement will the unbuffered ECC modules need over their service life?

No scheduled maintenance is required; the modules carry a limited lifetime warranty against manufacturing defects, so a failed stick would be replaced rather than serviced.

What limit appears first when the 2Rx8 kits run sustained workloads in a T330?

The platform maximum of 64 GB across four slots is reached before any memory-speed ceiling, so adding a second identical kit would hit the capacity limit first.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。