我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

DELL

DELL 400-AIYM 1.8TB 2.5" SAS 10000 RPM 12Gb/s Non Hot-Swap internal hard drive

SKU CH-0S8T-6QW23

A 1.8TB 2.5" SAS drive spinning at 10000 RPM with a 12Gb/s interface for non hot-swap bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor2.5"
  • High-capacity 1.8 TB storage for demanding workloads
  • Fast 10 000 RPM spindle speeds reduce data-access latency
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • Compact 2.5-inch form factor fits dense server bays
  • Non hot-swap tray design for fixed internal installations

Dell 400-AIYM 1.8TB SAS Drive

The Dell 400-AIYM is a new 1.8TB internal hard drive with a 2.5 inch form factor. It connects via a SAS interface operating at 12Gb/s and spins at 10000 RPM. The drive is supplied as a bare unit without a hot-swap tray.

Suits SAS 12Gb/s Bays

This drive fits servers or storage arrays that accept a 2.5 inch SAS device at 12Gb/s and provide a fixed mounting point for non hot-swap installation. It is not for systems that only support hot-swap trays, or for controllers limited to lower SAS link speeds.

12Gb/s SAS Interface Decides Fit

The single specification that decides compatibility is the 12Gb/s SAS interface. The host backplane or controller must support this exact signalling rate and the physical SAS connector. A mismatch here means the drive will not function in the target system.

商品特色

  • High-capacity 1.8 TB storage for demanding workloads
  • Fast 10 000 RPM spindle speeds reduce data-access latency
  • 12 Gb/s SAS interface delivers high-throughput connectivity
  • Compact 2.5-inch form factor fits dense server bays
  • Non hot-swap tray design for fixed internal installations

商品規格

BrandDell
Model400-AIYM
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor2.5"

商品問答

Does the 2.5" 400-AIYM need a 3.5" adapter tray to mount in a desktop bay?

The drive is a 2.5" form factor, so a 3.5" adapter bracket is required to secure it in a standard desktop drive bay.

How do I install the 12Gb/s SAS 400-AIYM without hot-swap support?

Power down the system, connect the SAS data and power cables directly to the drive, secure it in the bay, then configure the drive in the RAID controller BIOS before the OS loads.

What part of the 10000 RPM 400-AIYM wears out first and needs monitoring?

The mechanical spindle motor and actuator bearings wear over time; monitor SMART reallocated sector counts and seek error rates to anticipate replacement.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。