我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
A silver 2.5 inch Dell SATA SSD with hot-swap tray

DELL

DELL 400-APBF 480GB 2.5" SATA internal hard drive

SKU CH-SMXH-KPSK4

A 480GB 2.5-inch SATA solid-state drive with hot-swap capability for server storage upgrades

  • PackagingBare Drive
  • InterfaceSATA
  • Capacity480GB
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 480 GB capacity stores large workloads
  • 5 inch form factor fits standard drive bays
  • SATA 6 Gb/s interface delivers fast data transfer
  • Hot-swap tray enables drive changes without shutdown
  • Genuine Dell part 400-APBF ensures system compatibility

Dell 400-APBF 480GB SATA SSD

The Dell 400-APBF is a 480GB solid-state drive built for 2.5-inch SATA hot-swap bays. It uses a SATA 6Gb/s interface and ships as a bare drive without a retail tray. The part number 400-APBF identifies it as a Dell original component for compatible servers or storage arrays.

Suits servers with 2.5-inch hot-swap SATA trays

This drive fits systems that accept 2.5-inch SATA hot-swap devices and need 480GB of solid-state capacity. It is not for builds limited to 3.5-inch bays, for setups that cannot hot-swap, or for buyers who require a larger capacity than 480GB.

SATA 6Gb/s interface decides compatibility

The drive connects through a SATA 6Gb/s link, so the host must provide a matching SATA port and hot-swap backplane. If the system uses a different interface or lacks hot-swap support, the drive will not function as intended.

商品特色

  • 480 GB capacity stores large workloads
  • 5 inch form factor fits standard drive bays
  • SATA 6 Gb/s interface delivers fast data transfer
  • Hot-swap tray enables drive changes without shutdown
  • Genuine Dell part 400-APBF ensures system compatibility

商品規格

BrandDell
Model400-APBF
PackagingBare Drive
InterfaceSATA
Capacity480GB
Average Latency6Gb/s
Form Factor2.5"

商品問答

What host connector and bay size does my system need for the 2.5" SATA 400-APBF?

The drive plugs into a standard SATA data and power port and fits any 2.5" drive bay or hot-swap tray that accepts a 2.5" SATA SSD.

Will the 6 Gb/s SATA interface on the 400-APBF work with my older 3 Gb/s SATA controller?

Yes, the SATA 6 Gb/s interface is backward compatible and will operate at the 3 Gb/s link speed of the older controller.

How can I confirm the 480 GB 400-APBF is running at the rated 6 Gb/s link speed after installation?

Check the negotiated link speed in your BIOS, UEFI or OS disk utility — it should report a 6 Gb/s SATA connection for the drive.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。