我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL Constellation ES.3 ST4000NM0033 4TB 7200RPM 128MB 3.5" SATA internal hard drive

SKU CH-CZG8-GY3T3

A 4 TB 3.5" SATA internal hard drive spinning at 7200 RPM with a 128 MB cache

  • 4 TB capacity stores large media libraries
  • 7200 RPM spindle speed accelerates data access
  • 128 MB cache buffers frequent read and write operations
  • SATA 6 Gb/s interface enables fast host transfers
  • 5 inch form factor fits standard desktop bays

Dell Constellation ES.3 4TB SATA Drive

This is a 3.5 inch internal hard drive with a 4TB capacity, 7200RPM spindle speed and a 128MB cache. It connects via a SATA 6Gb/s interface and is supplied in new condition. The drive is designed for desktop systems requiring high-capacity bulk storage.

Suits builds needing large mechanical storage

Buyers who want silent operation or the low access latency of solid-state media should look elsewhere. Systems limited to a 2.5 inch drive bay cannot accommodate this 3.5 inch form factor. Workloads demanding sustained transfer rates beyond the SATA 6Gb/s link will not be satisfied by this drive.

Deciding specification: 4TB capacity

The four terabyte capacity is the single figure that determines whether this drive meets the storage requirement. If the project needs more raw space, a higher-capacity drive is required. If less space is needed, a smaller drive may reduce cost and power draw. The 7200RPM speed and 128MB cache support the capacity but do not replace it as the primary filter.

商品特色

  • 4 TB capacity stores large media libraries
  • 7200 RPM spindle speed accelerates data access
  • 128 MB cache buffers frequent read and write operations
  • SATA 6 Gb/s interface enables fast host transfers
  • 5 inch form factor fits standard desktop bays

商品規格

本商品目前尚未公佈規格。

商品問答

Does the 3.5-inch form factor fit a standard desktop drive bay?

Yes, the 3.5-inch SATA drive mounts in any standard desktop 3.5-inch bay using four side screws or a tool-less caddy.

What is the correct order for connecting the SATA data and power cables during installation?

Attach the SATA data cable to the motherboard and drive first, then connect the SATA power cable from the power supply to the drive.

How often should I run a surface scan on the 4TB platters to catch early sector errors?

Schedule a full surface scan every three to six months; the drive’s SMART attributes will also flag reallocated sectors automatically.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。