我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Dell PowerEdge R630 1U rack server front view showing ten 2.5 inch drive bays

DELL

DELL PowerEdge R630 10SFF 2x Xeon E5-2603 v3 384GB DDR4 No Drive

SKU CH-D4YS-XAMFQ

Rack server with dual 1.6 GHz Xeon E5-2603 v3 processors, 384 GB DDR4 ECC memory, ten 2.5-inch drive bays and PERC H730 SAS controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2603 v3 processors deliver 12 cores for parallel workloads
  • 384GB DDR4 ECC memory supports large datasets and virtualisation
  • 10-bay 2.5" chassis with PERC H730 SAS controller enables flexible storage arrays
  • iDRAC8 Enterprise licence provides comprehensive remote management
  • Dual 495W power supplies ensure redundant operation

Dell PowerEdge R630 10-bay server

This 1U rack server ships with two Xeon E5-2603 v3 processors running at 1.6GHz and 384GB of DDR4 ECC registered memory. It offers ten 2.5-inch drive bays backed by a PERC H730 SAS controller and includes iDRAC8 Enterprise remote management. The system is new, fully tested, and updated to the latest firmware before dispatch.

Suits memory-heavy workloads in a compact rack

The 384GB capacity fits virtualisation hosts, in-memory databases, or dense VDI deployments that need maximum RAM within a single 1U chassis. Buyers who need more than 1.5TB total memory or who require GPU acceleration should look at larger platforms. The integrated graphics and lack of installed drives also make it unsuitable for workloads demanding local high-speed storage or discrete compute out of the box.

Standard 1U rail mounting

Installation follows typical Dell rack procedures: slide the chassis into rails, connect power and network, then populate the ten hot-swap bays. The PERC H730 requires a brief RAID configuration step on first boot, and the iDRAC8 network port must be cabled separately for out-of-band access. Missing drive caddies or mismatched SAS/SATA cables are the most common oversights during initial build.

商品特色

  • Dual Xeon E5-2603 v3 processors deliver 12 cores for parallel workloads
  • 384GB DDR4 ECC memory supports large datasets and virtualisation
  • 10-bay 2.5" chassis with PERC H730 SAS controller enables flexible storage arrays
  • iDRAC8 Enterprise licence provides comprehensive remote management
  • Dual 495W power supplies ensure redundant operation

商品規格

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)10,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

商品問答

Do I need to supply my own 2.5-inch SATA or SAS drives for the ten front bays?

Yes, the chassis provides ten 2.5-inch bays and a PERC H730 SAS controller, but no drives are installed; you must add compatible SATA or SAS drives yourself.

Will the dual Xeon E5-2603 v3 CPUs and 384 GB DDR4 memory work with my existing DDR4 RDIMMs?

The system uses DDR4 ECC registered memory up to 1.5 TB total; any additional modules must be DDR4 RDIMMs that match the server's speed and rank requirements.

How can I confirm the iDRAC8 Enterprise remote management is active after first boot?

Connect the dedicated management port, power on the server, and watch for the iDRAC IP address on the POST screen or LCD; then log in to the web interface to verify the Enterprise licence.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。