我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small 35mm square 12V case fan with double ball bearing, 6300 RPM, 5.5 CFM airflow, 20 dB noise

Fans

Fans D03P-12TS3 35x35x10mm 12V 0.09A 6300RPM case fan

SKU CH-YQNS-46B45 MPN D03P-12TS3

Compact 35×35×10 mm axial fan spins at 6300 RPM delivering 5.5 CFM at 20 dB from a 12 V 0.09 A double ball bearing motor

  • Compact 35×35×10 mm frame fits tight spaces
  • Double ball bearing rated for 6300 RPM reliability
  • Quiet 20 dB operation at full speed
  • 12 V DC input with 3 V–13.5 V working range
  • Moves 5.5 CFM airflow for targeted cooling

Compact 35 mm axial fan for tight builds

This 35×35×10 mm axial fan runs on 12 V DC and draws 0.09 A for a rated 1.08 W. Double ball bearings support a 6300 RPM speed while noise stays at 20 dB. Airflow reaches 5.5 CFM across a 3 V to 13.5 V working range.

Suits space-constrained cooling, not high-flow needs

Builders fitting a 1U server, a small-form-factor PC or a GPU shroud will appreciate the slim 10 mm profile and low acoustic profile. Anyone needing substantial case airflow or radiator static pressure should look at larger fans with higher CFM ratings.

Drops into 35 mm mounts with two-wire power

The fan uses a standard two-pin 12 V connection and fits any 35 mm square mounting pattern. Its narrow frame leaves room for dense component layouts, while the wide voltage tolerance lets it run from regulated 12 V rails or fan controllers without extra circuitry.

商品特色

  • Compact 35×35×10 mm frame fits tight spaces
  • Double ball bearing rated for 6300 RPM reliability
  • Quiet 20 dB operation at full speed
  • 12 V DC input with 3 V–13.5 V working range
  • Moves 5.5 CFM airflow for targeted cooling

商品規格

本商品目前尚未公佈規格。

商品問答

What power connection must my board provide for the 12 V 0.09 A fan to run?

The fan requires a 12 V DC header that can supply at least 0.09 A; it will also operate anywhere between 3 V and 13.5 V.

Will the 35×35×10 mm frame and 5.5 CFM airflow fit the same mounting points as my existing 35 mm square fan?

Yes, the 35 mm square footprint matches standard 35 mm mounting holes, and the 10 mm thickness is the only dimension to verify against your chassis clearance.

How can I confirm the double ball bearing unit is spinning at the rated 6300 RPM after installation?

Monitor the fan header in BIOS or software; a steady reading near 6300 RPM with noise around 20 dB indicates correct operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。