我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Fujitsu

Fujitsu MBB2147RC 146GB SAS 10000 RPM 2.5" internal hard drive

SKU CH-VQ49-V2680

A 146 GB SAS hard drive spinning at 10000 RPM with 16 MB cache in a 2.5 inch form factor

  • InterfaceSAS
  • Capacity146GB
  • RPM10000 RPM
  • Cache16MB
  • Form Factor2.5"
  • 10000 RPM spindle accelerates data access for transaction-heavy workloads
  • SAS interface delivers dual-port reliability for enterprise arrays
  • 146 GB capacity fits operating system and critical applications
  • 16 MB cache buffers bursts to sustain throughput
  • 5 inch form factor enables dense server and storage deployments

146 GB SAS 10000 RPM drive

The Fujitsu MBB2147RC is a 2.5 inch internal hard drive with a 146 GB capacity and a 10000 RPM spindle speed. It uses a SAS interface and includes a 16 MB cache. The unit is supplied new in a caddy suitable for compatible drive bays.

Who this suits and who it does not

This drive fits servers or workstations that require a SAS connected 2.5 inch drive running at 10000 RPM. Buyers whose systems only accept a different physical interface or a 3.5 inch form factor cannot use this unit.

The specification that decides fit

The SAS interface is the single specification that determines whether this drive will connect to your controller or backplane. Verify that your hardware supports SAS before purchasing.

商品特色

  • 10000 RPM spindle accelerates data access for transaction-heavy workloads
  • SAS interface delivers dual-port reliability for enterprise arrays
  • 146 GB capacity fits operating system and critical applications
  • 16 MB cache buffers bursts to sustain throughput
  • 5 inch form factor enables dense server and storage deployments

商品規格

BrandHP
ModelMBB2147RC
InterfaceSAS
Capacity146GB
RPM10000 RPM
Cache16MB
Form Factor2.5"

商品問答

How do I install the 2.5" SAS drive into a 3.5" server bay using the supplied caddy?

Slide the drive into the caddy until the SAS connector seats, secure the four side screws, then insert the assembly into the hot-swap bay until the latch clicks.

Which component of the MBB2147RC is most likely to need replacement after several years of continuous operation?

The 10000 RPM spindle motor and actuator bearings wear first; the 16 MB cache and SAS interface electronics typically outlast the mechanical parts.

At what point does sustained write throughput hit a ceiling on this 146 GB 10000 RPM SAS drive?

Sequential writes saturate the SAS bus once the outer cylinders fill; inner-cylinder transfers drop toward 100 MB/s, limiting sustained large-file writes.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。