BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
GIGABYTE
ATX board with LGA 1155 socket, Intel H67 chipset, four DDR3 slots up to 32 GB, one PCIe x16, four SATA II plus two SATA III, Realtek ALC889 7.1 audio and RTL8111E gigabit LAN
The GIGABYTE GA-PH67A-D3-B3 fits standard ATX cases and accepts Intel Core i7, i5, i3, Pentium and Celeron processors in the LGA 1155 socket. Four DDR3 DIMM slots support up to 32GB of system memory. A single PCI Express x16 slot handles the graphics card. Six SATA ports, four at 3 Gb/s and two at 6 Gb/s, provide storage connectivity.
The board uses passive heatsinks on the Intel H67 chipset and voltage regulators, so it adds no fan noise of its own. Power consumption is determined by the chosen processor and graphics card rather than the motherboard itself. Realtek ALC889 audio and RTL8111E Gigabit LAN draw minimal power during typical desktop workloads.
Memory tops out at 32GB across the four slots, a fixed limit of the H67 chipset. If your workload needs more RAM, this board cannot accommodate it. For builds staying at or below that ceiling, the platform delivers standard desktop connectivity with USB 2.0, USB 3.0, 7.1-channel audio and wired networking.
| Brand | GIGABYTE |
|---|---|
| Series | GIGABYTE GA-PH67A-D3-B3 |
| Model | GIGABYTE GA-PH67A-D3-B3 |
| CPU Socket Type | LGA 1155 |
| CPU Type | 1. Support LGA1155 Slot Processor: Intel Core ™ i7 Processor/Intel Core ™ i5 Processor/Intel Core ™ i3 Processor/Intel Pentium Processor/Intel Celeron Processor 2. L3 cache depends on CPU |
| Chipset | Intel H67 |
| Maximum Memory Supported | 32GB |
| PCI Slots | 1 PCI Express x16 slot, supporting x16 operating specifications (PCIEX16) To maximize the performance of the graphics card, it is necessary to install it in the PCIEX16 slot when installing a graphics card. 1 PCI Express x16 slot, supporting x4 operating specifications (PCIEX4) * When installing adapters PCIEX1_2 or PCIEX1_3 slots, PCIEX4 slots can only operate at x1 bandwidth. 3 PCI Express x1 slots All PCI Express slots support PCI Express 2.0. 4. 2 PCI slots |
| SATA RAID | 4XSATA II interface; 2xSATA III interface |
| Audio Chipset | 1. Built-in Realtek ALC889 chip 2. Support High Definition Audio 3. Support 2/4/5 1/7.1 channels * To start the 7.1 channel audio output, you must use the front panel audio output of the HD (High Definition, High Fax) audio module and select the multi-channel audio function through the audio software. Support S/PDIF output |
| LAN Chipset | Built-in 1 Realtek RTL8111E chip (10/100/1000 Mbit) |
| Onboard USB | Built-in chipset: 1. Up to 10 USB 2.0/1 ports (4 on the rear panel, 6 need to be connected from the USB socket in the main board via the cable) Built-in Etron EJ168 chip: Supports up to 2 USB 3.0/2 ports on the rear panel |
Mount the board using the ATX 30.5x21.5cm hole pattern, then attach the supplied I/O back panel before securing the screws.
The onboard metal battery maintains CMOS settings and will eventually require replacement when the system loses time or BIOS settings.
The slot operates at PCI Express x16 specification; sustained maximum throughput is constrained by the x16 lane width and the connected graphics card's own thermal envelope.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?