我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

GIONEDA

GIONEDA mSATA 256GB internal SSD

SKU CH-5P6P-S0YSM

An mSATA internal SSD with 3D NAND delivering sequential reads up to 560 MB/s and writes up to 500 MB/s for faster boots and file loads

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactormSATA
  • Memory Components3D NAND

Style 256GB

Options 256GB

  • Fast boot and load times with sequential reads up to 550 MB/s
  • Responsive file writes at sequential speeds up to 500 MB/s
  • Data integrity through bad-block management, TRIM, garbage collection and S.M.A.R.T. monitoring
  • Proven reliability with 1.75M hours MTTF and original flash chips
  • Cool, silent operation in a compact 30 × 50 × 3.5 mm mSATA form factor

Capacity and fit

The GIONEDA mSATA 256GB drive uses the mSATA form factor measuring 50mm by 30mm by 3.5mm. It fits laptops and desktops that provide an mSATA slot and connects over a SATA 6 Gb/s link.

Build and daily use

3D NAND flash and a controller with bad-block management, TRIM and garbage collection keep performance steady. No moving parts mean silent operation, low heat and 35x better energy efficiency than a mechanical drive.

Upgrade path

Replacing a 2.5-inch hard drive with this SSD yields up to 550MB/s sequential read and 500MB/s sequential write. The 1.75M-hour MTTF rating and three-year warranty back the switch for older systems needing faster boot and load times.

商品特色

  • Fast boot and load times with sequential reads up to 550 MB/s
  • Responsive file writes at sequential speeds up to 500 MB/s
  • Data integrity through bad-block management, TRIM, garbage collection and S.M.A.R.T. monitoring
  • Proven reliability with 1.75M hours MTTF and original flash chips
  • Cool, silent operation in a compact 30 × 50 × 3.5 mm mSATA form factor

商品規格

Device TypeInternal Solid State Drive (SSD)
Form FactormSATA
Memory Components3D NAND

其他版本

同系列還有 2 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What SATA revision does the GIONEDA mSATA 256GB use and what real-world throughput does it cap at?

The drive runs on SATA 6 Gb/s, so sequential reads top out around 550 MB/s and writes around 500 MB/s in typical use.

What are the exact dimensions I need to clear in my laptop or desktop slot?

The board measures 50 mm × 30 mm × 3.5 mm, the standard mSATA footprint.

How do I install it and which step do people most often miss?

Insert the drive at an angle into the mSATA slot, press it flat, and secure it with the single retention screw; the step most often missed is fastening that screw, leaving the drive unseated.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。