我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 2.5 inch Intel D3-S4510 1.92TB SATA SSD

Intel

Intel D3-S4510 1.92TB SATA 2.5" enterprise SSD

SKU CH-C8K9-KPAN0

1.92 TB enterprise SATA SSD with 560 MB/s reads, 510 MB/s writes, 256-bit encryption and 7 mm z-height

  • Form Factor2.5"
  • Capacity1.92TB
  • Memory Components3D NAND
  • InterfaceSATA III
  • 92 TB capacity for large server datasets
  • 560 MB/s read speed accelerates data access
  • 510 MB/s write speed sustains heavy workloads
  • 256-bit encryption protects stored information
  • 7 mm z-height fits dense 2.5-inch bays

Enterprise SATA SSD for read-heavy workloads

The Intel D3-S4510 is a 1.92TB internal solid-state drive built for servers and storage arrays. It uses 3D NAND flash memory and connects through a standard SATA III interface. The 2.5-inch form factor fits 7mm drive bays in compatible chassis.

Suited for sequential read tasks

This drive delivers up to 560 MB/s read and 510 MB/s write speeds over the 600 MB/s SATA link. End-to-end data protection and enhanced power-loss protection help preserve data integrity. Teams needing higher throughput or lower latency than the SATA bus provides should consider a different interface.

Deciding spec: 1.92TB capacity on a SATA III bus

The single figure that determines fit is the 1.92TB capacity combined with the SATA III interface. It defines the maximum storage space available at SATA transfer rates. Verify the server backplane supports 2.5-inch SATA drives before ordering.

商品特色

  • 92 TB capacity for large server datasets
  • 560 MB/s read speed accelerates data access
  • 510 MB/s write speed sustains heavy workloads
  • 256-bit encryption protects stored information
  • 7 mm z-height fits dense 2.5-inch bays

商品規格

BrandIntel
SeriesD3-S4510
ModelSSDSC2KB019T801
Form Factor2.5"
Capacity1.92TB
Memory Components3D NAND
InterfaceSATA III

商品問答

What does the SATA 600 interface cap the drive at in practice?

The SATA 600 interface limits sequential reads to 560 MB/s and writes to 510 MB/s.

Will the 7 mm z-height fit my 2.5 inch bay?

The 2.5 inch form factor with a 0.3 inch height fits standard 7 mm drive bays and hot-swap trays.

How is the drive installed and what step is often missed?

Connect the SATA data and power cables, secure the drive in the bay, then enable AHCI in the BIOS so the OS recognises the SSD.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。