SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501805BTC
現貨
KEHIPI
KEHIPI 2× ESP32 CP2012 USB-C 38-pin dev boards + breakout shields
Two ESP32 CP2012 USB-C development boards with dual-core Wi-Fi and Bluetooth plus two breakout shields that split each GPIO pin into two connections
- Dual-core ESP32 with Wi-Fi and Bluetooth
- CP2012 USB-C interface for modern connectivity
- 38-pin layout fits breadboards without mounting holes
- Two breakout shields double every GPIO pin
- Double-layer FR-4 boards ensure stable signal paths
Two-pack ESP32 Type-C boards with breakout shields
This pack contains two ESP32 CP2012 USB-C development boards and two matching breakout shields. Each core board uses a 38-pin ESP-WROOM-32 module with integrated 2.4 GHz Wi-Fi and Bluetooth dual-mode radio. The CP2012 USB-C interface supplies power and serial communication for flashing and debugging. The FR-4 breakout shields split every GPIO into two solder pads on a 1.6 mm double-layer PCB, giving stable connections for breadboard or perfboard builds.
Makers needing duplicated I/O
The 38-pin layout is narrower than 30-pin modules, so both boards sit side-by-side on a standard breadboard without shorting adjacent rows. The breakout shields only fit the no-mounting-hole 38-pin variant, so owners of 30-pin ESP32 boards or versions with mounting holes cannot use the expansion shields. Projects that require more than two boards per order or a different USB connector will need a separate solution.
38-pin no-mounting-hole compatibility decides fit
The breakout shields are explicitly keyed to the 38-pin narrow ESP32 module without mounting holes. If your existing ESP32 board has 30 pins or includes mounting holes, the shields will not align and cannot be used. Verify the pin count and hole pattern before purchase; no other dimensions or interfaces affect compatibility.
商品特色
- Dual-core ESP32 with Wi-Fi and Bluetooth
- CP2012 USB-C interface for modern connectivity
- 38-pin layout fits breadboards without mounting holes
- Two breakout shields double every GPIO pin
- Double-layer FR-4 boards ensure stable signal paths
商品規格
| Brand | AITRIP |
|---|
商品問答
What USB interface does the CP2012 chip provide on this ESP32 board?
The board uses a USB-C connector driven by the CP2012 bridge for power and serial programming.
Which ESP32 dev boards does the breakout shield fit?
The shield only matches 38-pin narrow boards without mounting holes such as the referenced ASINs.
How do I attach the breakout shield to the dev board?
Align the 38-pin header exactly and press straight down; forcing it sideways bends pins and breaks contact.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
