EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
KEHIPI
Single-board computer with a 1.4 GHz 64-bit quad-core CPU, 1 GB RAM, 802.11n wireless LAN, Bluetooth 4.2, four USB ports and 40 GPIO pins
The KEHIPI Raspberry Pi 3 Model B+ is a single-board computer built around a Broadcom BCM2837 64-bit quad-core ARMv8 processor running at 1.4GHz with 1GB of RAM. It targets hobbyists, educators and engineers who need a ready-made Linux platform for sensors, automation or media projects without designing custom hardware.
On-board 802.11n wireless LAN and 10/100Mbps Ethernet share the internal USB 2.0 bus, so sustained throughput tops out well below the radio or line rate. Bluetooth 4.2 and Bluetooth Low Energy are provided by the BCM43143 module for peripheral links, but high-bandwidth streaming or large file transfers will saturate the shared bus quickly.
The 40-pin GPIO header, full-size HDMI, four USB 2.0 ports, CSI camera and DSI display connectors are all keyed and require no soldering. A 2.5A micro-USB supply is essential; weaker adapters cause brown-outs under USB load. The push-pull microSD slot eases card swaps, yet improper shutdowns still corrupt the filesystem on the boot media.
| Brand | Raspberry Pi |
|---|---|
| Model | Raspberry Pi 3 Model B+ |
| Part Number | Raspberry Pi 3 Model B+ |
This board is offered as a single configuration with a 1.4GHz quad-core processor and 1GB RAM.
The Broadcom BCM2837B0 ARMv8 quad-core A53 runs at 1.4GHz, giving faster single-thread and multi-thread performance than earlier Pi 3 boards for typical maker tasks.
On-board Wi-Fi uses 802.11n with Bluetooth 4.2, so wireless throughput tops out at 10/100Mbps wired-equivalent speeds and BLE is supported.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?