KingSpec P3-512-FB 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
KingSpec
A 2.5-inch SATA III internal SSD with 1TB of 3D NAND storage delivering up to 560MB/s reads and 530MB/s writes for faster boot and load times
Options P3-1TB-Soccer
The KingSpec P3-1TB-FB is a 2.5 inch internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and a SATA III 6Gbps interface to deliver sequential reads up to 560 MBps and writes up to 530 MBps.
With no moving parts the drive runs completely silent in normal use. Idle power consumption is rated at 0.25W, helping to extend battery life on portable systems while keeping desktop power draw minimal.
Native Command Queuing, TRIM, S.M.A.R.T., wear levelling, garbage collection and over-provisioning work together to maintain consistent performance. The drive is rated for 480TB written and a 1,000,000 hour MTBF.
| Brand | KingSpec |
|---|---|
| Series | P3-FB Series |
| Model | P3-1TB-FB |
| Part Number | P3-1TB-FB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 40,000 IOPS |
| 4KB Random Write | Up to 64,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Connect the drive to a SATA data cable and a SATA power connector, then enable AHCI mode in the BIOS before cloning or installing the OS; skipping AHCI leaves the drive running in legacy IDE mode.
No user maintenance is required; the controller handles wear leveling, garbage collection, over-provisioning and TRIM automatically, while S.M.A.R.T. attributes report health until the 480 TBW limit is approached.
Sequential writes top out at 530 MBps and random writes at 64,000 IOPS; once the SLC cache fills during heavy sustained writes, speeds will throttle to the native TLC NAND rate.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?