我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green bare circuit board DDR5 RDIMM with black memory chips and gold edge contacts

Kingston Technology Corp.

Kingston Technology Corp. KSM56R46BD4PMI-96MBI 96GB DDR5-5600 CL46 ECC Registered RDIMM server RAM

SKU CH-ZQZS-EY6FK MPN KSM56R46BD4PMI-96MBI

A 96 GB DDR5-5600 registered ECC RDIMM with CL46 latency for high-capacity server workloads

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Timing46-45-45
  • Voltage1.10V

Capacity 96GB

Rank 2Rx4

Option Micron, Full Lock

  • 96 GB capacity handles heavy multi-tasking workloads
  • DDR5 5600 MT/s speed moves data quickly
  • ECC registered design corrects errors for reliability
  • 2Rx4 dual-rank organisation increases memory density
  • 10 V operation reduces power draw

96GB DDR5-5600 RDIMM for servers

This 96GB DDR5-5600 CL46 ECC Registered RDIMM uses Micron components in a 2Rx4 layout. It runs at 5600 MHz with 46-45-45 timings at 1.10V on a 288-pin interface. The module targets enterprise servers and workstations that require high-capacity, error-correcting memory for virtualisation, databases or compute clusters.

Suited for registered-DIMM platforms needing

Buyers whose systems accept only unbuffered UDIMMs cannot use this module. Builds limited to lower single-module capacities should look at smaller RDIMMs. Workstations without ECC support in the CPU or chipset will not benefit from the error-correction feature.

Straightforward 288-pin installation

Align the key notch with the slot and press until the latches click; no heat spreader means tight clearance is rarely an issue. Common problems include mixing registered and unbuffered DIMMs, populating slots in the wrong order for the memory controller, or running the module on a board that does not support DDR5-5600 registered operation.

商品特色

  • 96 GB capacity handles heavy multi-tasking workloads
  • DDR5 5600 MT/s speed moves data quickly
  • ECC registered design corrects errors for reliability
  • 2Rx4 dual-rank organisation increases memory density
  • 10 V operation reduces power draw

商品規格

BrandKingston
ModelKSM56R46BD4PMI-96MBI
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Timing46-45-45
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesKingston's KSM56R46BD4PMI-96MBI is a 12G x 80-bit (96GB) DDR5-5600 CL46 SDRAM (Synchronous DRAM), 2Rx4, ECC, memory module, based on forty 6G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR5-5600 timing of 46-45-45 at 1.1V.
出貨重量0.14 kg
包裝尺寸142 × 43 × 8 mm

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

My motherboard has DDR5 slots — will this 288-pin RDIMM fit and run at 5600 MHz?

The module is a 288-pin DDR5 RDIMM rated for DDR5-5600 (PC5-44800) at 1.10 V. It requires a DDR5-compatible motherboard with registered-DIMM support and ECC enabled in the BIOS.

If I keep my existing DDR5-4800 RDIMMs, can I add this 96 GB module alongside them?

Mixing speeds will force all modules to run at the lowest common speed and timing; the 5600 MHz module will downclock to match 4800 MHz, and registered/ECC settings must be identical across every slot.

After installing, how do I confirm the module is running at CL46 46-45-45 timings?

Check the BIOS memory-info screen or a tool such as CPU-Z: it should show DDR5-5600, CAS 46, timings 46-45-45, voltage 1.10 V, ECC active and registered mode enabled.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。