SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501343BTC
現貨
LORDWORLD
LORDWORLD USB to UART Debugger Module for Raspberry Pi 5 Type-A Port
USB-to-UART debugger for Raspberry Pi 5 with selectable 3.3V or 5V TTL levels, onboard IO protection, and broad OS support
- Debug Raspberry Pi 5 across Windows 7 through 11, Mac, Linux and Android
- Hardware IO protection guards against surges and static for stable communication
- Onboard 3.3 V and 5 V TTL level selection via jumper pins
- Module draws power from USB and supplies 3.3 V or 5 V output
- Double-sided black immersion gold finish resists wear and looks professional
Raspberry Pi 5 UART Debugger
The LORDWORLD USB to UART module provides a dedicated serial debugging link for Raspberry Pi 5 boards. It connects through a standard Type-A USB port and is recognised by Windows 7 through 11, macOS, Linux and Android without extra drivers. Developers and hobbyists can access the Pi’s console for boot diagnostics, kernel development or headless configuration.
On-board protection and level selection
Integrated IO protection circuits guard against surge and static events during development sessions. A jumper selects between 3.3 V and 5 V TTL logic levels, matching the target interface without external converters. The module draws power directly from the USB bus, so no separate supply is required for typical debug workloads.
Double-sided immersion-gold PCB
The board uses a double-sided black immersion-gold finish that resists oxidation and withstands repeated connector cycles. This construction keeps the signal path reliable across long-term projects. Buyers who need isolation, higher voltage translation or multi-channel logging should look for a more advanced adapter.
商品特色
- Debug Raspberry Pi 5 across Windows 7 through 11, Mac, Linux and Android
- Hardware IO protection guards against surges and static for stable communication
- Onboard 3.3 V and 5 V TTL level selection via jumper pins
- Module draws power from USB and supplies 3.3 V or 5 V output
- Double-sided black immersion gold finish resists wear and looks professional
商品規格
| Brand | LORDWORLD |
|---|
商品問答
How do I connect this debugger module to a Raspberry Pi 5 and set the correct logic level?
Plug the Type-A USB end into the Pi 5, then short the onboard jumper to either the 3.3V or 5V pin to match the Pi's TTL level before powering up.
What on-board component may need attention after long-term use?
The jumper used to select 3.3V or 5V output can wear with repeated changes; keep it seated firmly on the chosen pin to maintain a stable voltage rail.
What limits the maximum baud rate during a continuous debugging session?
The USB-powered supply and the selected 3.3V or 5V TTL level set the practical ceiling for sustained high-speed serial traffic.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
