MINUTEMAN
MINUTEMAN ED10KTF 10000VA Tower UPS
10,000 VA tower UPS delivers pure sine-wave output at 120, 208, 220, 230 or 240 VAC with zero transfer time and a 972-joule surge rating
- International Version208VAC/240VAC
- VA Rating10000VA
- Watts10000W
- Output Voltage120/208/220/230/240VAC
- Battery ReplaceableB00025
- Interface PortDB-9
Model ED10KTF
- 10,000 VA pure sine wave output protects sensitive equipment
- LCD display shows AC input, battery status and fault alerts
- 972 joules surge energy rating absorbs damaging transients
- Replaceable B00025 battery extends service life
- DB-9 interface port enables remote monitoring
Critical Power Protection
The Minuteman Endeavor ED10KTF is a 10000VA tower UPS delivering pure sine wave output with zero transfer time. It supports critical applications requiring continuous, regulated power across multiple voltage configurations. The unit operates with 208VAC or 240VAC input and provides selectable 120, 208, 220, 230, or 240VAC output. A front LCD panel displays AC input status, battery status, and fault indication for immediate visibility.
Runtime and Interface Constraints
The internal battery provides approximately three minutes of standby power at full 10000W load, limiting extended outage coverage without additional battery packs. Surge protection is rated at 972 joules, which handles moderate transients but not severe lightning-induced spikes. Communication relies solely on a DB-9 serial port, requiring an optional SNMP card for network management integration. The 274.50 lbs weight demands structural floor support and professional installation planning.
Voltage Compatibility Decides Fit
This international version only accepts 208VAC or 240VAC input, so facilities with standard 120VAC service cannot use it without a step-up transformer. Output voltage is configurable across five settings to match connected equipment requirements. Buyers needing 120VAC input compatibility or longer battery runtime at full load should evaluate other models. The DB-9 interface also restricts direct network monitoring without the accessory card.
商品特色
- 10,000 VA pure sine wave output protects sensitive equipment
- LCD display shows AC input, battery status and fault alerts
- 972 joules surge energy rating absorbs damaging transients
- Replaceable B00025 battery extends service life
- DB-9 interface port enables remote monitoring
商品規格
| Brand | MINUTEMAN |
|---|---|
| Series | ENDEAVOR |
| Model | ED10KTF |
| International Version | 208VAC/240VAC |
| VA Rating | 10000VA |
| Watts | 10000W |
| Output Voltage | 120/208/220/230/240VAC |
| Battery Replaceable | B00025 |
| Interface Port | DB-9 |
| Surge Energy Rating | 972 Joules |
| Dimensions | 9.8" x 22.1" x 32.54" |
| Weight | 274.50 lbs. |
| 出貨重量 | 124.51 kg |
| 包裝尺寸 | 826 × 561 × 249 mm |
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
MINUTEMAN ED5KRT UPS 5000VA 4500W 4U Rack/Tower
- 208 (Default), 220,…
- 156-280VAC
MINUTEMAN ED6KRT UPS 6000VA 5400W 208-240V 4U Rack/Tower
- 208 (Default), 220,…
- 156-280VAC
MINUTEMAN ED10KRT UPS 10000VA 9000W 208-240V 4U Rack/Tower
- 208 (Default), 220,…
- 180-280VAC
商品問答
The Endeavor ED10KTF shows 10000 VA and 10000 W — which capacity should I choose for my load?
Both ratings are identical at 10000, so the unit delivers 10000 watts of real power; size your connected equipment to stay below that figure.
What does the 10000 W rating mean once the UPS is installed in my rack?
It means the UPS can supply a continuous 10000 watts of pure sine wave output with zero transfer time, supporting critical loads at 120, 208, 220, 230 or 240 VAC.
The DB-9 interface port — what monitoring standard does it use and what does it cap in practice?
The DB-9 port provides serial communication for UPS status, battery level and fault alerts; it does not carry network management traffic.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








