我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

myVolts

myVolts Replacement Power Supply HP A1700 A1705 A1710 A1712 420W

SKU CH-EQH6-80870

A reduced-depth 420 W AT power supply with 20+4-pin, SATA and Molex connectors for HP A1700, A1705, A1710 and A1712 desktops

  • TypeAT
  • 420 W peak output handles demanding desktop workloads
  • 280 W continuous rating delivers stable everyday power
  • 24-pin plus 4-pin CPU connectors fit modern motherboards
  • 3 SATA and 2 Molex plugs support multiple drives
  • 86" depth fits tight HP A1700 A1705 A1710 A1712 cases

Replacement PSU for HP Desktops

This myVolts power supply replaces the original units in HP A1700 A1705 A1710 and A1712 desktop models. It delivers up to 420 Watts maximum and 280 Watts total continuous power. The AT form factor fits a standard ATX slot with reduced depth for tighter chassis clearance.

420 Watt Peak with 280 Watt Continuous Rating

The single figure that decides compatibility is the 280 Watt total continuous output across +5 V -5 V +12 V1 +12 V2 +3.3 V -12 V and +5 V standby rails. If the original HP unit was rated higher than 280 Watts continuous this replacement may not sustain full system load.

Suits Direct HP Swaps Not High Power Builds

This unit suits owners of the listed HP desktops who need a like-for-like new replacement with 20+4 pin motherboard 4 pin CPU three SATA two Molex and one floppy connector. Builders needing more than 280 Watts continuous or modular cabling should look at higher rated ATX power supplies.

商品特色

  • 420 W peak output handles demanding desktop workloads
  • 280 W continuous rating delivers stable everyday power
  • 24-pin plus 4-pin CPU connectors fit modern motherboards
  • 3 SATA and 2 Molex plugs support multiple drives
  • 86" depth fits tight HP A1700 A1705 A1710 A1712 cases

商品規格

TypeAT

商品問答

What does the 420 W maximum mean once the unit is installed?

The 420 W figure is the peak output the supply can deliver for short periods; continuous combined output across all rails is rated at 280 W, so sustained loads should stay within that lower total.

Which interface standard governs the drive power connectors and what does it limit?

The three SATA 15-pin connectors follow the SATA power specification, limiting each drive connector to the standard 3.3 V, 5 V and 12 V rails defined by that interface.

What physical space is needed to mount this supply in a case?

The unit measures 5.86" by 3.3" with reduced depth, so it fits a standard ATX mounting cut-out while leaving extra clearance behind the rear panel.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。