NEMIX RAM DDR5 5600 128GB (8×16GB) CL46 1.1V ECC Registered RDIMM Supermicro H13DSH memory upgrade
- 128GB (8 x 16GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
128GB dual-rank DDR5-5600 ECC registered RDIMM kit validated for Supermicro H14DSG-O-CPU motherboards
Size 128GB 2X64GB
This 128GB kit provides two 64GB DDR5 5600 Registered ECC modules built for the Supermicro H14DSG-O-CPU motherboard. The 2Rx4 organisation, 1.1V operation and CL46 timing match the board's memory-controller requirements so the full capacity is recognised at rated speed. It targets administrators who need maximum registered memory in a two-DIMM population.
The jump is worth it when your current registered ECC modules run below 5600MT/s or total capacity limits the workloads you can host. Moving to this PC5-44800 kit raises bandwidth and doubles density per slot without changing voltage or form factor. It is not for systems that accept only unbuffered UDIMMs or that cap registered memory below the 128GB two-module configuration.
Confirm the H14DSG-O-CPU supports 64GB 2Rx4 Registered DIMMs in the intended slots and check the approved population order before ordering. Ensure the chassis accommodates 288-pin RDIMM height and that the BIOS version in use recognises the stated speed and rank. Buyers needing unbuffered memory, SODIMM form factor or voltages other than 1.1V should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Yes, the kit uses the 288-pin Registered RDIMM form factor that the H14DSG-O-CPU requires; it is not a UDIMM or SODIMM, so it matches the board's physical slot keying.
Install the modules in the exact slot sequence listed in the Supermicro H14DSG-O-CPU manual; the step most often missed is confirming that population order before seating the DIMMs.
No, the RDIMMs have no onboard firmware or battery; they operate at 1.1 V with CL46 timing and require no maintenance beyond standard server dust control.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?