我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAQ memory upgrade

SKU CH-VG4N-6PAYD

16 GB DDR5 5600 MHz CL46 1.1 V 288-pin UDIMM validated for Supermicro X13SAQ boards

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1.10 V for full-speed recognition
  • Verified fit for Supermicro X13SAQ 288-pin UDIMM slot
  • Major OEM chips tested stable at rated speed and timing
  • Single-rank 1Rx8 Non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with free US-based technical support

Exact-match DDR5 upgrade for Supermicro X13SAQ

This 16GB DDR5-5600 module is built to the precise rank, voltage, and timing the Supermicro X13SAQ motherboard expects. It installs as a single 288-pin unbuffered UDIMM and is recognised at full capacity without manual configuration. The 1Rx8 organisation and 1.1V operation match the board's native memory population rules.

16GB capacity at CL46 5600MHz

The stick delivers 16GB of non-ECC memory running at PC5-44800 speeds with a CAS latency of 46. It handles everyday multitasking, office suites, and light content creation with comfortable headroom. Heavy workloads such as large-scale virtualisation, high-resolution video timelines, or in-memory databases will exhaust the single-module capacity before the bandwidth limit is reached.

Replaces slower or smaller DDR5 DIMMs

Swapping out an 8GB DDR5-4800 module or a mismatched kit removes a capacity bottleneck and restores the platform's rated 5600MT/s data rate. The upgrade is worthwhile when the system currently runs below the board's maximum supported speed or when total memory falls short of 16GB. It does not suit builds that require ECC error correction, registered signalling, or SODIMM form factors.

商品特色

  • Exact-match 16 GB DDR5-5600 CL46 1.10 V for full-speed recognition
  • Verified fit for Supermicro X13SAQ 288-pin UDIMM slot
  • Major OEM chips tested stable at rated speed and timing
  • Single-rank 1Rx8 Non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with free US-based technical support

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 16 GB DDR5 5600 module run at its rated speed alongside slower DDR5 DIMMs already installed in my Supermicro X13SAQ?

The board will clock all installed modules down to the speed of the slowest DIMM, so this kit will operate at the lower frequency if mixed with slower memory.

How can I confirm the 288-pin UDIMM is detected at 5600 MHz with CL46 timings after installation?

Enter the BIOS or use a system-information utility such as CPU-Z to verify the memory frequency reads 5600 MT/s and the CAS latency shows 46.

Does the package include only the memory module or are any additional items such as a heat spreader or cables provided?

The box contains the 16 GB DDR5 5600 1Rx8 UDIMM itself; no heat spreader, cables or other accessories are included.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。