我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz ECC UDIMM CL46 1.1V 1Rx8 memory upgrade

SKU CH-DAZ2-S84J4

16 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro X14SAZ-TLN4F

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • ECC corrects single-bit errors preventing data corruption
  • 5600 MHz DDR5 speed matches controller specification
  • 1 V operation meets JEDEC standard voltage
  • 1Rx8 unbuffered layout fits Supermicro X14SAZ-TLN4F
  • 288-pin UDIMM form factor installs in standard slots

Exact-match upgrade for Supermicro X14SAZ-TLN4F

This 16GB DDR5 5600MHz ECC UDIMM is built to the precise rank, voltage and timing the Supermicro X14SAZ-TLN4F memory controller expects. It installs as a single 288-pin unbuffered module and runs at its rated CL46 speed without manual tuning. Buyers who need registered DIMMs or a different capacity should look elsewhere.

Verify your motherboard configuration

The Supermicro X14SAZ-TLN4F has specific population rules for DDR5 ECC UDIMMs. Consult the board manual for supported capacities, approved slot order and installation steps before ordering. Systems that require RDIMM or SODIMM form factors cannot use this module.

Sustained error-correcting operation

ECC circuitry detects and corrects single-bit errors continuously during long workloads, preventing silent data corruption that can accumulate over hours of operation. The 1.1V operating voltage keeps power draw steady while the unbuffered design maintains low latency throughout extended sessions.

商品特色

  • ECC corrects single-bit errors preventing data corruption
  • 5600 MHz DDR5 speed matches controller specification
  • 1 V operation meets JEDEC standard voltage
  • 1Rx8 unbuffered layout fits Supermicro X14SAZ-TLN4F
  • 288-pin UDIMM form factor installs in standard slots

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 288-pin DDR5 ECC UDIMM arrive as a single 16 GB module or do I need to buy anything else to reach that capacity?

The package contains one 16 GB DDR5 5600 MHz CL46 1.1 V ECC UDIMM; no additional modules are required to obtain the stated 16 GB capacity.

The listing shows only a 16 GB 1Rx8 version — how do I decide if this is the right capacity for my Supermicro X14SAZ-TLN4F build?

Choose this 16 GB 1Rx8 kit when your board's memory population rules call for a single unbuffered ECC UDIMM per channel; consult the motherboard manual for the maximum supported capacity and approved DIMM order before purchasing.

What does the 5600 MHz PC5-44800 rating mean once the module is installed in the Supermicro X14SAZ-TLN4F?

The module will run at DDR5 5600 MT/s (PC5-44800 bandwidth) with CL46 latency at 1.1 V, delivering the exact speed, timing and voltage the X14SAZ-TLN4F memory controller expects for full-capacity recognition and rated performance.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。