SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497241BTC
現貨
NEMIX RAM
NEMIX RAM 192GB (6x32GB) DDR4 3200 CL22 2Rx4 1.2V ECC RDIMM memory upgrade
A 192 GB DDR4 ECC registered kit of six 32 GB modules running at 3200 MT/s with CL22 latency and 1.2 V operation
- Capacity192GB (6 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 192 GB total capacity for memory-intensive server workloads
- DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
- ECC registered design detects and corrects errors to protect data integrity
- 2Rx4 dual-rank organisation across six 32 GB modules for high density
- 2 V operation reduces power draw in compatible ThinkMate Supermicro systems
192GB DDR4 ECC RDIMM Kit
This NEMIX RAM kit delivers 192GB across six 32GB registered DIMMs built for ThinkMate Supermicro SuperServer 740P-TR and 740P-TRT tower systems. ECC and registered operation provide the error correction and signal integrity required for mission-critical server workloads. Modules run at DDR4 3200 with CL22 latency at 1.2V. The 288-pin RDIMM form factor fits the validated platforms directly.
Upgrade From Lower Capacity Or Non-ECC
The jump is worth it when your current configuration lacks the 192GB total capacity or runs unbuffered non-ECC memory that cannot meet data-integrity demands. Registered 2Rx4 organisation allows the memory controller to address higher densities per channel than unbuffered alternatives. Systems already populated to the maximum supported slot count cannot accept this kit without removing existing modules.
DDR4 3200 Registered Interface Limits
DDR4 3200 sets the maximum transfer rate at PC4-25600 and the registered buffer adds one clock cycle of command latency versus unbuffered modules. The 1.2V operating voltage is fixed for the DDR4 standard and cannot be lowered for power saving. ECC overhead consumes a portion of the raw bandwidth for error detection and correction. Mixing registered and unbuffered DIMMs in the same system is not supported.
商品特色
- 192 GB total capacity for memory-intensive server workloads
- DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
- ECC registered design detects and corrects errors to protect data integrity
- 2Rx4 dual-rank organisation across six 32 GB modules for high density
- 2 V operation reduces power draw in compatible ThinkMate Supermicro systems
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-324K6 |
| Capacity | 192GB (6 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 192GB (6X32GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
Does the 288-pin DDR4 RDIMM form factor fit the Supermicro SuperServer 740P-TR and 740P-TRT tower memory slots?
Yes, the kit uses standard 288-pin DDR4 RDIMM modules designed for the ThinkMate Supermicro SuperServer 740P-TR and 740P-TRT tower platforms.
What is the correct sequence for populating the six 32 GB modules across the server memory channels?
Follow the Supermicro motherboard manual to populate all six slots in the prescribed channel order; the 2Rx4 registered DIMMs must be installed in matched sets per channel for proper operation.
When should the registered ECC RDIMMs be replaced if correctable error counts start rising in the system logs?
Replace modules when the platform management firmware reports increasing correctable ECC errors or when memory diagnostics flag a specific DIMM as degraded.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
