我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 4800 ECC Registered RDIMM CL40 1.1V 2Rx4 Supermicro H13SSL-NT

SKU CH-BSNB-HJTZ5

256 GB kit of four 64 GB DDR5 4800 RDIMM modules with ECC, registered buffering, CL40 latency and 1.1 V operation, validated for the Supermicro H13SSL-NT motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity for memory-intensive server workloads using four 64 GB modules
  • DDR5-4800 speed with CL40 latency runs at the rated frequency your board expects
  • Registered ECC design corrects single-bit errors and offloads the memory controller for full-slot stability
  • 1 V operation matches the platform voltage requirement for reliable operation
  • 288-pin RDIMM form factor verified compatible with Supermicro H13SSL-NT motherboard

Exact-match server memory kit

This 256 GB kit comprises four 64 GB DDR5 4800 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. It installs in the 288-pin slots required by that board and is recognised at full capacity and rated speed without manual tuning.

Low-voltage registered operation

Each module runs at 1.1 V with CL40 latency, and the registered architecture buffers address and control signals so the memory controller stays stable with all slots populated. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads.

Sustained enterprise workloads

The kit is designed for continuous operation in fully populated configurations where registered buffering and error correction maintain data integrity over long periods. Buyers who need unbuffered UDIMMs, SODIMM form factors or non-ECC memory for consumer platforms cannot use this product.

商品特色

  • 256 GB total capacity for memory-intensive server workloads using four 64 GB modules
  • DDR5-4800 speed with CL40 latency runs at the rated frequency your board expects
  • Registered ECC design corrects single-bit errors and offloads the memory controller for full-slot stability
  • 1 V operation matches the platform voltage requirement for reliable operation
  • 288-pin RDIMM form factor verified compatible with Supermicro H13SSL-NT motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 4×64GB DDR5 RDIMM kit in the Supermicro H13SSL-NT, and which slot order do people often get wrong?

Populate the four 288-pin RDIMM slots in the exact sequence listed in the H13SSL-NT manual; the board requires registered ECC modules in a specific channel order to recognise the full 256GB at DDR5-4800.

What maintenance or replacement will the 256GB DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; ECC corrects single-bit errors on the fly, and a lifetime replacement warranty covers any module that fails.

What limit appears first when the 4×64GB DDR5-4800 CL40 kit runs sustained workloads on the H13SSL-NT?

The memory controller's maximum supported speed of DDR5-4800 (PC5-38400) is the first ceiling; all four 2Rx4 ranks run at that rate with CL40 latency and 1.10V, so bandwidth and latency are fixed by the platform.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。