BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00279313BTC
現貨
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 ECC RDIMM CL22 1Rx8 1.2V 288-pin Supermicro 510P-M/MR compatible
A 32 GB DDR4 ECC registered kit running at 3200 MHz with CL22 latency for Supermicro 510P-M and 510P-MR servers
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data errors in critical workloads
- Registered design stabilises signal integrity on dense server boards
- DDR4 3200 speed delivers high throughput for demanding applications
- 2 V operation reduces power draw and heat output
- Validated for Supermicro 510P-M and 510P-MR systems
ECC Registered DDR4 Kit
This 32 GB kit contains two 16 GB DDR4 3200 modules built for registered server platforms. ECC and registered buffering protect data integrity in workloads that cannot tolerate silent corruption. The 1Rx8 organisation and CL22 timing match the specifications validated for Supermicro 510P-M and 510P-MR systems.
288-Pin RDIMM Form Factor
Each module uses the standard 288-pin DDR4 RDIMM connector and operates at 1.2 V without a heat spreader. Registered signalling reduces electrical load on the memory controller, allowing stable operation in multi-DIMM server boards. The low-profile design fits dense chassis where taller heat spreaders would interfere with airflow or adjacent components.
DDR4 3200 Bandwidth Limit
The PC4-25600 interface caps maximum throughput at the rated 3200 MT/s, so workloads needing higher memory bandwidth will hit this ceiling. Registered DIMMs cannot be used in consumer desktop boards that expect unbuffered modules. Capacity is fixed at 32 GB across the two modules, so expansion requires additional DIMM slots and matching registered ECC kits.
商品特色
- ECC protection prevents data errors in critical workloads
- Registered design stabilises signal integrity on dense server boards
- DDR4 3200 speed delivers high throughput for demanding applications
- 2 V operation reduces power draw and heat output
- Validated for Supermicro 510P-M and 510P-MR systems
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
What DDR4 speed and PC4 rating does this 3200 kit use?
The kit runs at DDR4 3200 with a PC4-25600 data rate and CL22 latency.
Will these 288-pin RDIMMs fit in a Supermicro 510P-M or 510P-MR server?
The modules are 288-pin DDR4 RDIMMs validated for the Supermicro 510P-M and 510P-MR platforms.
Do I need to install both 16 GB sticks together for registered ECC operation?
Install the pair in matching DIMM slots per the server manual; registered ECC requires identical modules in the correct channels.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
