我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 ECC Registered RDIMM 2Rx8 CL46 1.1V Supermicro H14DST-FL memory upgrade

SKU CH-26FR-QVCTK

48GB DDR5 5600 registered ECC RDIMM, 2Rx8 CL46 1.1V, validated for Supermicro H14DST-FL motherboards

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 48GB

顯示另外 30 款選項
  • 48 GB capacity for large workloads
  • DDR5 5600 speed with CL46 timing for rated performance
  • ECC and registered design catches errors and offloads the controller
  • 1 V operation matches server memory controller requirements
  • Verified fit for Supermicro H14DST-FL 288-pin RDIMM slots

48GB DDR5 RDIMM for Supermicro H14DST-FL

This 48GB DDR5 5600 ECC Registered RDIMM is built for the Supermicro H14DST-FL motherboard. It delivers 48GB of registered DDR5 memory with CL46 latency at 1.1V. The 2Rx8 rank configuration matches the board's memory controller expectations. It targets administrators upgrading or populating that specific server platform.

Replaces slower or smaller DDR5 RDIMMs on the same

The jump is worth it when your workload needs the full 48GB per slot at the rated 5600 MT/s speed. It upgrades from lower-capacity registered modules that leave slots underutilized. It is not for systems requiring UDIMM or SODIMM form factors. It is not for boards that do not support registered ECC DDR5 at this density.

Installs like any 288-pin RDIMM following the manual

Align the notch, press evenly until the latches click, and follow the board's population order. The registered design helps stability when all slots are filled. What usually goes wrong is ignoring the motherboard's approved DIMM sequence or mixing ranks. Always verify the supported configuration before purchase.

商品特色

  • 48 GB capacity for large workloads
  • DDR5 5600 speed with CL46 timing for rated performance
  • ECC and registered design catches errors and offloads the controller
  • 1 V operation matches server memory controller requirements
  • Verified fit for Supermicro H14DST-FL 288-pin RDIMM slots

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 288-pin RDIMM fit the Supermicro H14DST-FL DIMM slots?

Yes, the module uses the 288-pin DDR5 RDIMM form factor that the H14DST-FL requires; it is not a UDIMM or SODIMM so it matches the board's physical socket.

What is the correct population order when installing this 2Rx8 Registered ECC module?

Consult the motherboard manual for the approved DIMM population sequence; the board's memory controller expects a specific slot order for Registered ECC DIMMs to initialise at full 5600 MT/s.

Does the lack of a heat spreader mean I must add active airflow over the DIMMs later?

The module ships without a heat spreader; ensure your server chassis provides sufficient airflow across the memory slots to keep the DRAM within its 1.1 V operating envelope.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。