我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-Y6N0-6XST7

576GB DDR5 6400 CL52 1.1V ECC RDIMM kit for Supermicro H14DSG-O-CPU servers

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 576 GB total capacity from six 96 GB modules
  • DDR5-6400 speed with CL52 latency at 1.1 V
  • Registered ECC design for error correction and full-slot stability
  • 288-pin RDIMM form factor matched to Supermicro H14DSG-O-CPU
  • Built with major OEM chips from Samsung, Micron or Hynix

576GB DDR5-6400 ECC RDIMM kit

This 576GB kit contains six 96GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. Each module runs at 1.1V with CL52 latency and a 2Rx4 organisation, matching the board's memory controller expectations for full-capacity recognition and rated-speed operation.

Suits servers needing maximum registered ECC

The Registered (buffered) architecture offloads the memory controller so all slots stay stable when fully populated, while ECC corrects single-bit errors on the fly. This kit is not for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or lower-density modules that the board's population rules do not support.

576GB total across six 96GB DIMMs

The kit fills six slots with 96GB each, delivering the full 576GB at DDR5-6400 (PC5-51200). Capacity headroom ends when the motherboard's maximum supported memory per slot or total population limit is reached; consult the system manual for exact population order and approved configurations before installation.

商品特色

  • 576 GB total capacity from six 96 GB modules
  • DDR5-6400 speed with CL52 latency at 1.1 V
  • Registered ECC design for error correction and full-slot stability
  • 288-pin RDIMM form factor matched to Supermicro H14DSG-O-CPU
  • Built with major OEM chips from Samsung, Micron or Hynix

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

My Supermicro H14DSG-O-CPU motherboard only has 8 DDR5 slots — will this 6-module 576 GB kit leave room for future expansion?

Yes, the kit uses six 288-pin RDIMM modules, leaving two slots free on an 8-slot board. Follow the manual's population order to keep all channels balanced and allow adding matched modules later.

Can I mix these 6400 CL52 1.1 V RDIMMs with slower DDR5 ECC modules already installed in my server?

The board will downclock every module to the slowest speed and loosest latency present. For stable operation at the rated 6400 MT/s and CL52, populate all channels with identical 1.1 V registered DIMMs.

After installing the 6x96 GB kit, how can I verify the server sees the full 576 GB at DDR5-6400 with ECC active?

Check the BIOS memory information screen or run dmidecode / lshw on Linux; both will show 576 GB total, 6400 MT/s data rate, registered ECC type, and 1.1 V operating voltage.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。