NEMIX RAM 32GB DDR5 4800 ECC UDIMM CL40 2Rx8 1.1V 288-pin QNAP TS-H1277AXU-RP
- 32GB
- DDR5 4800 (PC5 3840…
NEMIX RAM
64 GB dual-channel DDR5 ECC UDIMM kit running at 4800 MHz with CL40 latency for the QNAP TS-H1677AXU-RP NAS
Capacity 64GB 2X32GB
This 64GB kit contains two 32GB DDR5 4800 modules built to PC5-38400 specifications. It targets IT professionals and NAS administrators who need error-correcting memory for the QNAP TS-H1677AXU-RP platform. Each module runs at 1.1V with CL40 latency and uses a 2Rx8 organisation for stable operation under sustained workloads.
The kit suits buyers who must add 64GB of ECC unbuffered DDR5 to a compatible QNAP NAS and want factory-tested modules from a specialist memory supplier. It is not for buyers who need registered or load-reduced DIMMs, nor for systems that require a heat spreader on every module. The unbuffered design and absence of a spreader mean the memory connects directly to the board without additional cooling hardware.
The single specification that decides fitment is the 288-pin DDR5 ECC unbuffered UDIMM form factor running at 1.1V with CL40 timing. Only systems that accept this exact module type, voltage and latency will recognise the full 64GB capacity at 4800MT/s. Verify the QNAP TS-H1677AXU-RP motherboard manual before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR5 4800MHZ ECC Unbuffered UDIMM NAS Memory |
| Part Number | ME38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Qnap |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC Unbuffered UDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The kit is rated at 4800 MT/s with a PC5-38400 designation; the NAS will operate the modules at the highest speed its memory controller supports.
Each module uses a standard 288-pin DDR5 UDIMM form factor without a heat spreader, so it fits the NAS DIMM slots without clearance issues.
Power off the NAS, open the chassis, insert both modules firmly until the latches click, then power on and verify 64GB is recognised in the QTS firmware.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?