我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5-5600 CL46 2Rx8 1.1V ECC Registered RDIMM for Supermicro H14DSG-O-CPU

SKU CH-VE1B-016R0

64 GB DDR5-5600 ECC registered RDIMM kit with CL46 latency and 1.1 V operation, validated for the Supermicro H14DSG-O-CPU motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

顯示另外 30 款選項
  • 64GB dual-rank kit recognised at full capacity by the Supermicro H14DSG-O-CPU memory controller
  • Registered ECC architecture corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5-5600 CL46 at 1.1V delivers the exact speed, timing and voltage the board specifies
  • 288-pin RDIMM form factor matches the motherboard slot requirements without adapters
  • Built with major OEM Samsung, Micron or Hynix components for enterprise-grade reliability

Supermicro H14DSG-O-CPU memory kit

This 64GB kit contains two 32GB DDR5-5600 registered ECC RDIMMs built to the exact specifications of the Supermicro H14DSG-O-CPU motherboard. The modules run at 1.1V with CL46 latency and a 2Rx8 rank configuration so the memory controller recognises the full capacity immediately. No heat spreaders are fitted, keeping the profile compatible with dense server chassis.

Server builds needing registered ECC RDIMMs

The registered architecture buffers address and command signals, allowing every slot to be populated at the rated 5600 speed while ECC corrects single-bit errors before they affect workloads. This kit suits administrators upgrading or populating the named Supermicro platform. Buyers whose boards require unbuffered UDIMMs, SODIMMs, non-ECC modules or a different pin count should look elsewhere.

288-pin DDR5 RDIMM form factor

The 288-pin registered DIMM is the only module type the Supermicro H14DSG-O-CPU accepts; UDIMMs and SODIMMs will not fit the slots. Verify the motherboard manual for approved population order and maximum supported capacity before ordering.

商品特色

  • 64GB dual-rank kit recognised at full capacity by the Supermicro H14DSG-O-CPU memory controller
  • Registered ECC architecture corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5-5600 CL46 at 1.1V delivers the exact speed, timing and voltage the board specifies
  • 288-pin RDIMM form factor matches the motherboard slot requirements without adapters
  • Built with major OEM Samsung, Micron or Hynix components for enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does this kit require a motherboard that accepts 288-pin DDR5 RDIMM modules?

Yes, the kit uses 288-pin DDR5 RDIMM form factor and is verified for the Supermicro H14DSG-O-CPU motherboard.

Can I mix these 2Rx8 registered ECC modules with existing UDIMM or SODIMM memory in the same server?

No, registered RDIMM modules cannot be mixed with unbuffered UDIMM or SODIMM types; the motherboard requires RDIMM population only.

After installation, how can I confirm the system recognises both 32 GB modules at the rated 5600 MT/s speed?

Check the BIOS memory information or OS reporting tool; it should show 64 GB total capacity and DDR5-5600 (PC5-44800) operating frequency.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。