我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 ECC UDIMM sticks, no heat spreaders, 288-pin edge connectors visible

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 ECC UDIMM CL46 1.1V 2Rx8 Supermicro X14SAE-F memory upgrade

SKU CH-0YM7-HG82A

A 64 GB DDR5 ECC UDIMM kit running at 5600 MHz with CL46 latency and 1.1 V operation, built for the Supermicro X14SAE-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB dual-channel kit fills two slots for full capacity
  • DDR5 5600 speed matches the motherboard's rated frequency
  • ECC protection corrects single-bit errors to prevent data corruption
  • Unbuffered 288-pin UDIMM fits the board's required form factor
  • 1 V CL46 timing aligns with the memory controller's spec

Exact-fit DDR5 ECC kit for Supermicro X14SAE-F

This 64 GB kit contains two 32 GB DDR5 5600 unbuffered ECC UDIMMs built to the CL46 1.10 V 2Rx8 specification the board expects. The 288-pin modules install directly into the motherboard's memory slots without adapters. Major OEM Samsung, Micron or Hynix components are used.

Sustained-load behaviour with ECC active

Error-correcting code detects and corrects single-bit errors on the fly during continuous operation, preventing silent data corruption that can accumulate over long workloads. The native DDR5 5600 speed and CL46 timing are maintained under load because the modules match the memory controller's voltage and rank requirements. Unbuffered design keeps latency low for responsive multi-threaded tasks.

Replaces mismatched or lower-capacity DDR5 ECC

The jump is worthwhile when the system currently runs with smaller modules, mixed ranks or non-ECC memory that limits capacity or stability. Builders who need registered DIMMs, SODIMMs or a different DDR generation cannot use this kit. Systems that do not support 2Rx8 unbuffered ECC at 1.10 V will not recognise the full 64 GB.

商品特色

  • 64 GB dual-channel kit fills two slots for full capacity
  • DDR5 5600 speed matches the motherboard's rated frequency
  • ECC protection corrects single-bit errors to prevent data corruption
  • Unbuffered 288-pin UDIMM fits the board's required form factor
  • 1 V CL46 timing aligns with the memory controller's spec

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much heat will the 1.1V DDR5 ECC UDIMM kit produce running all day?

At 1.1V and CL46 these unbuffered DDR5 modules draw less power than higher-voltage kits, so they run cooler inside a Supermicro X14SAE-F chassis with normal airflow.

What motherboard slot and memory type must I already have to use this 64GB kit?

The board needs 288-pin DDR5 UDIMM slots that accept unbuffered ECC memory; RDIMM or SODIMM sockets will not work.

Will this 2Rx8 DDR5-5600 kit run at rated speed alongside older DDR5 DIMMs I keep?

Mixing ranks or speeds usually forces the memory controller to downclock to the slowest module; for full 5600MHz operation populate all slots with identical 2Rx8 CL46 kits.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。