我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR4 3200 CL22 ECC Registered RDIMM memory upgrade

SKU CH-8GMF-Q7CSF

A 64 GB DDR4-3200 ECC Registered RDIMM kit of four 16 GB modules at CL22 and 1.2 V, validated for the Supermicro X12QCH+ motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • 64 GB kit enables full-capacity server operation with four 16 GB modules
  • Registered ECC design prevents silent data corruption and supports fully populated slots
  • DDR4-3200 CL22 at 1.2 V matches the memory controller's exact timing requirements
  • 288-pin RDIMM form factor fits the Supermicro X12QCH+ motherboard's DIMM slots
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability

Exact-match DDR4 server kit

This NEMIX RAM kit delivers 64 GB across four 16 GB DDR4-3200 registered ECC RDIMMs. Each module runs at 1.2 V with CL22 latency and a 1Rx8 organisation. The 288-pin registered design matches the Supermicro X12QCH+ motherboard requirements for full-capacity recognition at rated speed.

Suited for populated Supermicro servers

Administrators expanding a Supermicro X12QCH+ system to its supported maximum will find the precise rank, voltage and timing the memory controller expects. Builders using consumer UDIMMs, SODIMMs or non-ECC memory should look elsewhere because the board requires registered ECC RDIMMs to operate correctly.

Straightforward registered DIMM installation

Align the notch on each 288-pin module with the slot key, press firmly until the latches engage, and follow the motherboard manual for the approved population order. The most common issue is mixing registered and unbuffered DIMMs or skipping the prescribed slot sequence, which prevents the system from posting at full capacity.

商品特色

  • 64 GB kit enables full-capacity server operation with four 16 GB modules
  • Registered ECC design prevents silent data corruption and supports fully populated slots
  • DDR4-3200 CL22 at 1.2 V matches the memory controller's exact timing requirements
  • 288-pin RDIMM form factor fits the Supermicro X12QCH+ motherboard's DIMM slots
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Which motherboard must I already have for this 4×16 GB DDR4-3200 CL22 ECC RDIMM kit to work?

The kit is verified for the Supermicro X12QCH+ motherboard that requires DDR4 3200 MHz PC4-25600 registered DIMMs.

Will these 1Rx8 registered ECC modules run alongside older DDR4 RDIMMs I keep in the same server?

Mixing ranks or speeds can prevent full-speed operation; the board manual lists approved population rules for each slot.

How do I confirm the 64 GB kit is recognised at DDR4-3200 with ECC active after installation?

Check the BIOS memory information screen — it should show 64 GB total, 3200 MT/s, and ECC enabled for each DIMM.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。