NEMIX RAM DDR4 3200 32GB 2x16GB ECC Registered RDIMM 1Rx8 CL22 1.2V 288-pin Supermicro X12QCH+ memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64 GB DDR4-3200 ECC Registered RDIMM kit of four 16 GB modules at CL22 and 1.2 V, validated for the Supermicro X12QCH+ motherboard
Size 64GB 4X16GB
This NEMIX RAM kit delivers 64 GB across four 16 GB DDR4-3200 registered ECC RDIMMs. Each module runs at 1.2 V with CL22 latency and a 1Rx8 organisation. The 288-pin registered design matches the Supermicro X12QCH+ motherboard requirements for full-capacity recognition at rated speed.
Administrators expanding a Supermicro X12QCH+ system to its supported maximum will find the precise rank, voltage and timing the memory controller expects. Builders using consumer UDIMMs, SODIMMs or non-ECC memory should look elsewhere because the board requires registered ECC RDIMMs to operate correctly.
Align the notch on each 288-pin module with the slot key, press firmly until the latches engage, and follow the motherboard manual for the approved population order. The most common issue is mixing registered and unbuffered DIMMs or skipping the prescribed slot sequence, which prevents the system from posting at full capacity.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR4 ECC RDIMM Registered Server Memory |
| Part Number | MR25600-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is verified for the Supermicro X12QCH+ motherboard that requires DDR4 3200 MHz PC4-25600 registered DIMMs.
Mixing ranks or speeds can prevent full-speed operation; the board manual lists approved population rules for each slot.
Check the BIOS memory information screen — it should show 64 GB total, 3200 MT/s, and ECC enabled for each DIMM.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?