We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR4 RDIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM DDR4 3200MHz 256GB 2x128GB ECC RDIMM CL22 1.2V Supermicro X12QCH+ memory upgrade

SKU CH-4EYJ-3ZHSB

256 GB dual-rank DDR4 ECC registered kit with two 128 GB modules running at 3200 MHz CL22 on 1.2 V for Supermicro X12QCH+ servers

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 256GB 2X128GB

Show 8 more configurations
  • 256 GB total capacity from two 128 GB modules enables dense server memory configurations
  • DDR4 3200 speed with CL22 latency delivers rated throughput for Supermicro X12QCH+ systems
  • Registered ECC design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • 2 V operating voltage matches the board's specification for efficient power draw
  • 288-pin RDIMM form factor with 2Rx4 organisation ensures exact fit and recognition on the target motherboard

256GB DDR4-3200 ECC RDIMM kit

This NEMIX RAM kit delivers 256GB of DDR4-3200 registered ECC memory in a matched pair of 128GB modules. It is built for the Supermicro X12QCH+ motherboard and meets the board's requirement for 288-pin RDIMM form factor, 2Rx4 rank structure and 1.2V operation. The CL22 timing matches the controller specification so the system recognises the full capacity at rated speed.

Registered ECC architecture

Registered buffering reduces electrical load on the memory controller, allowing every slot to run fully populated at the rated 3200 MT/s without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The kit is validated against the Supermicro X12QCH+ population rules so installers can follow the manual's approved DIMM order without guesswork.

Suited for capacity-bound server upgrades

This kit suits administrators expanding a Supermicro X12QCH+ platform to its maximum supported memory where registered ECC and 2Rx4 density are required. It is not for desktop or workstation boards that accept only unbuffered UDIMMs, nor for systems limited to lower single-module capacities or different pin counts. Builders needing SODIMM, non-ECC or lower-voltage modules should look elsewhere.

Highlights

  • 256 GB total capacity from two 128 GB modules enables dense server memory configurations
  • DDR4 3200 speed with CL22 latency delivers rated throughput for Supermicro X12QCH+ systems
  • Registered ECC design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • 2 V operating voltage matches the board's specification for efficient power draw
  • 288-pin RDIMM form factor with 2Rx4 organisation ensures exact fit and recognition on the target motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR4 3200MHz PC4-25600 2Rx4 1.2V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx4 ECC RDIMM modules need periodic replacement under continuous server workloads?

The modules are built with major OEM Samsung, Micron or Hynix chips and carry a lifetime replacement warranty; no scheduled replacement is required for the DDR4 3200 1.20V 288-pin kit.

What sustained-use limit appears first when the 256GB kit runs at full DDR4 3200 speed all day?

The registered ECC design offloads the memory controller so every slot runs fully populated at rated CL22 1.2V without throttling; the first limit is the motherboard's maximum supported capacity.

How much heat and power does the 2x128GB RDIMM kit produce during 24/7 operation?

Each 128GB module operates at 1.2V without a heat spreader; the registered architecture keeps power draw low and thermals manageable inside a Supermicro X12QCH+ chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.