We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR4 64GB (2x32GB) 3200MHz CL22 ECC Registered RDIMM Supermicro X12QCH+ memory upgrade

SKU CH-CHZ1-F7T2Q

64 GB (2 × 32 GB) DDR4-3200 ECC Registered RDIMM kit, CL22 1.2 V 2Rx8, validated for Supermicro X12QCH+ motherboards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 64GB 2X32GB

Show 8 more configurations
  • 64 GB kit lets the Supermicro X12QCH+ run fully populated at rated speed
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • Exact DDR4-3200 CL22 1.20 V spec matches the board's memory controller expectations
  • 2Rx8 288-pin RDIMM form factor fits the motherboard's required population rules
  • Lifetime replacement coverage with free US-based technical support included

Exact-match DDR4-3200 RDIMM kit

This 64GB kit contains two 32GB registered ECC modules built to the DDR4-3200 (PC4-25600) standard. It runs at 1.2V with CL22 timing and a 2Rx8 organisation, matching the specifications the Supermicro X12QCH+ memory controller expects for full-speed operation.

Suited for populated server slots

The registered architecture and ECC function make it appropriate for workloads that require maximum capacity per channel and error correction. Builders who need unbuffered UDIMMs, SODIMM form factors, non-ECC memory or speeds other than DDR4-3200 should look at other products.

64GB capacity across two slots

Two 32GB RDIMMs fill a pair of 288-pin slots and deliver the full 64GB at the rated 3200MT/s. Adding further modules beyond the board's validated population rules will exceed the supported configuration and require a different memory arrangement.

Highlights

  • 64 GB kit lets the Supermicro X12QCH+ run fully populated at rated speed
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • Exact DDR4-3200 CL22 1.20 V spec matches the board's memory controller expectations
  • 2Rx8 288-pin RDIMM form factor fits the motherboard's required population rules
  • Lifetime replacement coverage with free US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR4 3200MHz PC4-25600 2Rx8 1.2V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard is required for this 288-pin DDR4 RDIMM kit?

The kit is verified for the Supermicro X12QCH+ motherboard that accepts DDR4 3200MHz PC4-25600 registered ECC modules.

Can I mix these 2Rx8 registered DIMMs with unbuffered UDIMMs already in my server?

No, registered RDIMMs and unbuffered UDIMMs use different signalling and cannot be installed together on the same motherboard.

How do I confirm the kit is running at 3200MHz CL22 after installation?

Check the BIOS memory information or use a tool such as dmidecode to verify speed shows 3200 MT/s and CAS latency 22.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.