我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 1.1V ECC Registered RDIMM for Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-9F25-XMV6F

64 GB DDR5-5600 ECC registered RDIMM, 2Rx4 CL46 1.1 V, validated for Supermicro X14SDW-64CM-SP9F

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Exact 64 GB DDR5-5600 match for Supermicro X14SDW-64CM-SP9F
  • Registered ECC architecture prevents silent data corruption
  • 1 V operation reduces server power draw
  • 2Rx4 288-pin RDIMM installs in every supported slot
  • Lifetime replacement warranty with US technical support

64GB DDR5 5600 RDIMM for Supermicro X14SDW-64CM-SP9F

This 64GB DDR5-5600 registered ECC module is built for the Supermicro X14SDW-64CM-SP9F motherboard. It delivers 64GB of PC5-44800 memory at 1.1V with CL46 latency in a 288-pin RDIMM form factor. The 2Rx4 organisation matches the board's memory controller requirements for full-capacity recognition.

Replaces slower DDR5 or incomplete kits

Upgrading from lower-speed DDR5 modules or partially populated channels lets the memory controller run every slot at the rated 5600 MT/s. The jump is worth it when your workloads need the full registered ECC bandwidth and single-bit error correction across all populated slots without downclocking.

Check manual for population rules

Before ordering, verify the motherboard manual for approved DIMM population order, maximum supported capacity per slot, and total system capacity. The registered RDIMM form factor is required; UDIMM or SODIMM modules will not fit or function in this platform.

商品特色

  • Exact 64 GB DDR5-5600 match for Supermicro X14SDW-64CM-SP9F
  • Registered ECC architecture prevents silent data corruption
  • 1 V operation reduces server power draw
  • 2Rx4 288-pin RDIMM installs in every supported slot
  • Lifetime replacement warranty with US technical support

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 288-pin DDR5 RDIMM fit the Supermicro X14SDW-64CM-SP9F motherboard slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the Supermicro X14SDW-64CM-SP9F memory slots exactly. The module is a registered ECC RDIMM, not a UDIMM or SODIMM, so it seats correctly in the server board's DDR5 DIMM sockets.

What is the correct installation step for this 2Rx4 registered ECC module on the Supermicro X14SDW-64CM-SP9F?

Consult the motherboard manual for the approved DIMM population order, then insert the 288-pin RDIMM into the designated slot until the retention clips click. The step people miss is verifying the population sequence for 2Rx4 registered modules before powering on.

Does the 1.10V DDR5 5600 CL46 module require any firmware updates or ongoing maintenance on the Supermicro X14SDW-64CM-SP9F?

No scheduled maintenance is required for the memory itself. The module runs at 1.10V with CL46 timings at DDR5 5600. Keep the system BIOS current per Supermicro's release notes to ensure continued compatibility and optimal operation.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。