NEMIX RAM
NEMIX RAM 64GB DDR5 5600 CL46 4Rx4 ECC RDIMM for Dell PowerEdge XE9780L/XE9785L memory upgrade
A 64 GB DDR5 registered ECC module running at 5600 MHz with CL46 latency and 1.1 V operation for Dell PowerEdge XE9780L and XE9785L servers
- Capacity64GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Server-grade ECC corrects data errors for reliable operation
- 64GB capacity expands memory headroom for demanding workloads
- DDR5 5600 speed delivers high bandwidth for data-intensive tasks
- Registered 4Rx4 design supports dense configurations in compatible Dell PowerEdge systems
- 1V operation reduces power draw per module
Dell PowerEdge XE9780L and XE9785L server memory
This NEMIX RAM module provides 64GB of DDR5 ECC registered memory for Dell PowerEdge XE9780L and XE9785L rack servers. It operates at 5600MHz with a CAS latency of CL46 and runs at 1.1V. The single 288-pin RDIMM uses a 4Rx4 rank configuration.
Suited for administrators upgrading compatible
This module fits Dell PowerEdge XE9780L and XE9785L systems that support DDR5 5600 registered ECC RDIMMs. Builders working with consumer desktops, laptops, or servers requiring unbuffered UDIMMs, LRDIMMs, or non-ECC memory should choose a different part.
The registered ECC RDIMM form factor decides
The module is a 288-pin DDR5 RDIMM with on-board register and error-correcting code. Only motherboards wired for registered ECC DDR5 can use it; systems wired for unbuffered or load-reduced DIMMs will not accept this part.
商品特色
- Server-grade ECC corrects data errors for reliable operation
- 64GB capacity expands memory headroom for demanding workloads
- DDR5 5600 speed delivers high bandwidth for data-intensive tasks
- Registered 4Rx4 design supports dense configurations in compatible Dell PowerEdge systems
- 1V operation reduces power draw per module
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-944K1 |
| Capacity | 64GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB (1 x 64GB) DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM |
商品問答
Will this 4Rx4 DDR5 5600 RDIMM run in mixed ranks with existing 2Rx4 modules in my PowerEdge XE9780L?
The module is a 4Rx4 registered DDR5 5600 DIMM at 1.1 V; Dell PowerEdge XE9780L and XE9785L memory population rules determine whether mixed ranks are allowed per channel.
How do I verify the 64 GB DDR5 5600 CL46 ECC RDIMM is operating correctly after installation?
Check BIOS or iDRAC for 64 GB detected at 5600 MT/s, ECC enabled, and no correctable-error counters incrementing during POST or stress test.
Does the single 64 GB 288-pin DDR5 RDIMM ship with any heat spreader, cable or installation tool?
The package contains only the 64 GB 288-pin DDR5 5600 CL46 4Rx4 ECC RDIMM; no heat spreader, cables or tools are included.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



