BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277496BTC
現貨
NEMIX RAM
NEMIX RAM 8GB DDR4 2400 CL17 260-PIN SODIMM POSIFLEX HS-6514
8GB DDR4 2400 CL17 SODIMM module built for the POSIFLEX HS-6514 terminal
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX HS-6514 all-in-one terminals
- 8 GB DDR4 2400 MHz CL17 single module
- Low 1.20 V power draw for efficiency
- 260-pin SODIMM fits compact POS chassis
- Built with major OEM Samsung Micron Hynix chips
POSIFLEX HS-6514 terminal memory upgrade
This NEMIX RAM module is an 8 GB DDR4 SODIMM built specifically for the POSIFLEX HS-6514 high-end compact all-in-one terminal with replaceable printer. It runs at 2400 MHz with a CAS latency of 17 and operates at 1.2 V. The unbuffered, non-ECC design matches the terminal’s original memory specification.
Replacing slower or smaller DDR4 SODIMMs
If the terminal currently uses a lower-capacity DDR4 module or one rated below PC4-19200, this 8 GB stick restores the intended memory bandwidth for point-of-sale workloads. The upgrade is worthwhile when the system shows sluggish multitasking or when the application suite demands more than the existing memory can provide.
Check terminal memory slot and maximum capacity
Verify that the HS-6514 has a free 260-pin SODIMM slot or that you are replacing the only installed module. Confirm the terminal’s maximum supported memory per slot and in total before ordering. Ensure the BIOS is up to date so the new module is recognised at its rated speed.
商品特色
- Designed for POSIFLEX HS-6514 all-in-one terminals
- 8 GB DDR4 2400 MHz CL17 single module
- Low 1.20 V power draw for efficiency
- 260-pin SODIMM fits compact POS chassis
- Built with major OEM Samsung Micron Hynix chips
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM |
商品問答
Will this 260-pin SODIMM fit the memory slot in a POSIFLEX HS-6514 terminal?
Yes, the module is a 260-pin DDR4 SODIMM built to match the POSIFLEX HS-6514 slot exactly.
What is the correct way to seat the module, and what step do people often miss?
Insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches.
Does this 1.20 V DDR4 module need any future maintenance or replacement?
No, it is a non-ECC unbuffered SODIMM with no moving parts and no heat spreader, so it requires no ongoing maintenance.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
